Ten24 - K-Lab

Home
United Kingdom
Liverpool
Ten24 - K-Lab

Directions Website

Our ecosystem: Ten24 for the core parts, K-Lab for limited and experimental work, and Trip, as the team representing us on track.

store now open 👉 https://ten24.store/

10/11/2026

**TEN24 | K-Lab - NEXUS & VORN**

Two projects, one shared platform.

Been making some more progress with our chassis development, and thought it was time to show where both projects are heading.

*NEXUS* is our modular RC drift chassis conversion, built around a 6mm 7075 aluminium U-frame and interchangeable 2mm carbon fibre mounting plates.

The nexus in the image shown below (low batt) you can see its currently wearing yokomo front and rear plates it is currently on its third prototype revision, with the latest changes focusing on mounting accuracy, fitment and refining the overall design.

*VORN* takes that same U-frame architecture in a completely different direction.

The plan is a transverse front-motor, rear-wheel-drive chassis, using a conventional pinion and spur to drive a jackshaft, with a belt transferring power to the rear differential.

We've started developing the gearbox housing and a new raised carbon battery tray, with the aim of sharing as many components as possible between the two platforms.

There's still a lot to work out, particularly with VORN's drivetrain, but that's half the fun of developing something from scratch.

NEXUS is getting closer to a complete test-fit prototype, while VORN is only just starting to take shape.

Two different approaches to RC drifting, built around the same foundation.

**TEN24 | K-Lab**

06/11/2026

**TEN24 | K-Lab — New Project**

Been working on something a little different over the last few days.

The idea is to develop our own modular RC drift chassis conversion, moving away from the traditional full-length carbon chassis and centre spine designs.

Instead, we're using a custom aluminium U-frame to connect separate front and rear carbon pods.

The current design uses a 4mm 7075 aluminium frame with 3mm carbon plates, a transverse battery layout and the option to swap out the front and rear pods for different platforms.

We're starting with Yokomo compatibility, but the long-term idea is to develop alternative mounting plates for other chassis too.

There's been quite a few revisions already, experimenting with the overall layout, weight distribution, mounting arrangements and how the chassis might flex.

**Today we're printing the first prototype!**

This first version is purely for test fitting. We want to see how everything lines up with the actual hardware, check clearances and figure out what needs changing before committing to machined aluminium and carbon.

Still very early days, and there's plenty of development ahead, but it'll be nice to finally get something physical on the bench.

Not trying to reinvent the wheel, just exploring a different way of doing things.

**TEN24 | K-Lab**

20/10/2026

you've seen lightweight projects from others, meet k-lab's project stupid light

bonus points if you can guess the platform its for

12/10/2026

Been working on a few new bits for TEN24.

Here's a sneak peek at the instructions for one of the next releases.

(Blurry on purpose, don't adjust your glasses 🤣)

The idea is simple. Less messing around with endless tiny shims, more flexibility when setting arm position and taking up unwanted play.

More to come 👀

04/10/2026

0.0 we need it

We're lowering the barrier to entry for RC drifting - Meet v0 (vee-zero)

A new kind of 1:10 scale RC drift chassis.

Learn more → Link in the comments

03/10/2026

TEN24 has been dead quiet for a while.

If I’m honest, sales didn’t really go how I hoped and I kind of lost faith in it for a bit.

I think I also made the mistake of trying to keep it as just an RC drift/crawling thing when that’s not really me anyway. I bounce between hobbies constantly and there’s always something new I’m getting into.

So I’m gonna start bringing TEN24 back, just a bit differently.

RC drifting and crawling are still staying, but I want to bring a bit more of me into it too. FPV, airbrushing, tools and whatever else I end up getting obsessed with.

Basically if it’s something I’d use myself, buy myself or think is actually worth having, it can have a place on TEN24.

I’m starting small and seeing where it goes this time.

No big promises, just gonna build it back up properly.

10/05/2026

Don't miss out - Pre-order your Ten24 drift servo now using the link in comments.

📷 = Doritune Rc

04/05/2026

01/05/2026

Address

Liverpool
L

Website

http://ten24.store/

Alerts

Be the first to know and let us send you an email when Ten24 - K-Lab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.