29/09/2022
LUCIA 500
This Vee bottom boat has a 10 degree rise of floor or dead rise, is made from 3mm Plates.
Fitted with a Short Shaft Transom, Engine Slip Rail, Transom Boards, Drain Plug, Anchor, Chain and Tie-off, 2 off Rod Holders. The Hulls are built using 3mm Marine Grade Aluminium Plate. The Boat is fitted with more than the Require Built-in Reserve Buoyancy (BIRB), as defined by SAMSA.
Characteristics:
PPRODUCT ID 1020 850 650 3000 LUCIA 500
ROF BOTTOM RISE 10 Degrees
FLARE 20 Degrees
WIDTH 2072.6 mm
DEPTH OF BOAT 775.4 mm
OVER ALL HEIGHT 831.4 mm
LENGTH OVER ALL 5000 mm
BiRB Approved Foam 0.680 m³
Boat Weight 281.4 Kg
Build Cycle receipt of material 5 Weeks
DELTA MAX 1.048103 m3
MAX LOAD @250 0.766704 Tonnes
Number of People 8 ADULTS
Delta Max is the maximum displacement permitted for this boat, measured from the lowest point on the boat above the loaded water line. It is the responsibility of the operator to load the boat evenly and with the correct trim. Recommend trimming aft.
Maximum Load is the total deadweight at Delta Max. = 767 Kg
The Boat is designed to be over-loaded to the point of taking on water, without damage.
Extras Available:
• Navigation Lights
• Search Lights
• Bilge Pump
• Tee Top Awning Aft
• Half Awning
• Full Awning
• Locker Fwd with Hatch
• Battery Locker hatch Aft
• Fuel Tank Locker Aft
• Bespoke Seating Arrangement
• Trailer
• Centre Console Aft
• Steering Wheel
• Telemotor
• Trim and Tilt
• Instrument Panel with indicators and switching
