Piercision Rifles

05/29/2026

FYI. Phone line is still down.

04/14/2026

Got some shipments in from Thunder Beast Arms Corporation, Unknown Suppressors and Manners Composite Stocks in the last few days.. Heres whats on the shelf.

TBAC Magnus K RR in HUB and SR. I have HUB to Direct thread and CB adaptors on the shelf.
Unknown Reaper in HUB, Direct Thread, and CB attachments
Manners Pro Hunter and Pro Hunter Adjustable. Short, Medium and Long action inlets.

As well as pallets of inventory from ADG Cartridge Brass, Lapua, Berger Bullets, Nightforce Optics, Benchmark Barrels, Hawkins Precision, and more.

Check out the website and give me a shout if you have any questions.

www.piercisionrifles.com

03/15/2026

Managed to get a couple pieces of perfection from Pirate Forge. Ones headed out to a buddy in Montana and I’m keeping the other one. Insanely sharp right out of the box. I love the material for the handle as well. I got a chance to try mine out quick on a cow that died on the farm. This blade cut through and peeled the hide back so fast it was crazy. Yanked the backstraps and inner loins out and cleaned up with ease. Can’t wait to put it to work this fall. Thank you so much for the awesome blades Wayne.

03/04/2026

Well after building several shorter barrel 6.5 cal magnums for myself I decided that a 260 Rem AI would probably do the same thing since its not overbore. The prc's and saum's lose quite a bit in the shorter barrels. I had a custom spec reamer made from JGS. I decided to put a 20" barrel on it since Im running a can. Unknown Suppressors Reaper only added 5 3/4" past the crown. The hydro formed brass hammered while breaking the barrel in. Consistently half moa or better at 625 yds. Since I had over 10k of the 140 elite hunters on the shelf I decided I might as use em up lol. I have a pile of N555 so I tested it first after the barrel was broke in and brass was shot once. 46.2-47.0 was under 2" tall on the ladder test at 625 yds. 140 Elite Hunter at 2790 fps. There was another node up at 2865 fps but it wasn't as wide and had some powder crunch while using a drop tube. No pressure signs at 2865 fps. Decided to just load up in the middle of the mild and wide node. Shot 4 groups in a row with 46.6 gr at 625 yds and all had under 2" of vertical. Since then Ive shot a bunch more groups at 625 yds and all have been under .5 moa vertical. Same w 900 yds. Ive shot some 1-2" groups at 900 for 3 shots and several 3" groups. And a 5 shot at 900 that was 2.75" tall and 3 1/2" wide. This thing is stupid accurate and consistent as well as hardly any recoil. I don't see the Alpha small primer brass wearing out in less than 25-30 firings due to this mild load. Case head isn't moving after several firings. Ill be using this rifle for everything that doesn't require my 300 norma improved. Cow elk out to 600 and deer/antelope to 1000.

As a side note I did try H4350 and it had some nodes at 2830 and 2850 but they werent near as accurate as this n555 load. And the 4350 loads showed a little more pressure on the case head.

Rifle has the following:
Defiance Machine ANTIX Short action cut for unknown 3.150 mags
Manners Composite Stocks Pro Hunter Adjustable
Benchmark Barrels 6.5 cal 7.5 tw 20" sendero light
Unknown Bottom metal and 3.150 mags
Triggertech Rough Diamond set at 1.5 lbs
Unknown Reaper with the SRS mini CB
Nightforce NX8 4-32 MIL C bedded into some NF 4 screw rings

Rifle with optics and suppressor weighs 9 lbs 4 oz.

As soon as the NX6 5-30 MIL comes in Ill throw it on and try it out.
Ill be building some of these to have in stock shortly.
Dies are readily available from Redding or Short Action Customs
Alpha Brass and 140 Bergers are on hand.

Defiance Machine Benchmark Barrels Manners Composite Stocks Unknown Suppressors Nightforce Optics Berger Bullets

02/18/2026

Made it back from Arizona for the Berger Southwest Nationals. Brought two rifles down. Used my back up rifle for the mid range nationals and managed a 7th place with a 600-37x. The long range started a couple days later and I managed a 449-28 on the first day Palma which was like 29th. The next day I shot a 400-19x out of 400 at 1000, highest score for the day, and bumped up to 1st place. Going in to the next day I felt great. The main rifle was absolutely hammering. I managed to get first relay for the final day. Hardly any wind and theres no mirage. Im shooting 10s and Xs in the first relay and all of a sudden somebody crossfires a VERY high 7 on to my target. Fellow shooters around me told me to challenge it as they knew it wasn't possible that it came from my rifle. I challenge it and lose the appeal. Around the same time somebody crossfires on to Brad Johnsons target and had a 6. He hadn't shot so he wasn't assigned the crossfire. I aim at the same spot after losing the appeal and start hammering 10s and X's again. Pit change and I talk to the target puller and ask if hed checked behind the spotting disk for another shot before he marked the 7. Cause Id been pounding the 10 and x ring. He said he didn't check behind the spotting disk before marking a 7. I get down to the pits and find another crossfire on my target in the 6 ring. This crossfire hadn't had a sticker put on it. It was just a few inches from the crossfire that was a 7. Took a pic of the 6. Talked to the Pit Officer and explained it. Cant undo the 7. Obviously I was beyond pi**ed at that point. I dropped 6 pts the final relay and ended up 20th. Im guessing the crossfires came from the sling shooters.

Aside from shooting. Jodi and the kids came down. We took our time driving out. Stopped at plenty of parks to hike and stretch our legs. We stopped and spent the night in Grand Junction to see some friends. Was great to catch up and enjoy the scenery. We then made our way through Moab and stopped at Arch's national park for some hikes. It was some amazing scenery that we will have to go back to and spend more time at. Once we were down in Phoenix we did some hikes and caught up with family we hadn't seen in forever. Jodi and the kids went hiking with them on the days I was shooting. It was great to spend the time with everyone while I wasn't shooting. For the return trip I dropped Jodi and the kids off at the airport and made really good time not stopping every few hours LOL. Was nice enjoying the weather and time away with family but Im back in the shop now.

www.piercisionrifles.com

01/08/2026

Got another nice shipment of these bad boys in. Unknown 30 cal Reapers. Got em in Direct thread 5/8x24 or tbac cb attachment. Rated down to 20" 300 normas. Running it on my 22" 300 Norma Improved and loving it. Get em before theyre sold out again.

10 oz with the 2 port brake on the end.
8 oz with no brake on the end.

www.piercisionrifles.com

12/18/2025

Got some Long Action Pro Pack Folders in from Manners.

www.piercisionrifles.com

Manners Composite Stocks

12/09/2025

If you get time check out the new podcast. Thank you Erick for the opportunity and time on your podcast. I really enjoyed it.

New Episode Dropped today! Don't miss hearing from Ryan Peirce - Gun Smith and Competitive Shooter.
Ryan Pierce shares his journey chasing his passions and dreams to become a champion long distance shooter and nationally renowned gun smith. Ryan builds custom long-range rifles as good as anyone on the planet and does so working for himself out of his one-man shop. Hear an awesome story of success, grinding it out, and chasing your dreams! Ryan shares his story, lessons learned along the way and from his grandfather, and some great adventures hunting and shooting.


https://youtu.be/u1rLtWFOJMs

http://fromthegroundupshow.com

https://pod.link/1846907140

12/04/2025

Heres a 300 Norma Improved that shipped out last week to a customer. Shots 2,3&4 down the rifle with measured .208"@100. 245 GR LRHT Bergers. Couldnt find a pic of the bedding job but was perfect as always. Customer is really happy with the rifle.

Rifle has the following parts:
Bat Vesper
Manners Pro Hunter
Benchmark 26" 8.5 tw 1.250 Sendero
5 Port Titanium Self Timing "Muscle" Brake
Unknown Munitions 3.950 Bottom metal and mags
Triggertech Diamond set at 1.5 lbs
Nightforce 7-35 ATACR bedded into a set of NF rings

Stuffs on the shelf ready to ship.

www.piercisionrifles.com

Piercision Rifles Manners Composite Stocks BAT Machine Company Inc. Benchmark Barrels Nightforce Optics Berger Bullets

12/02/2025

For anybody thats traveled a fair distance to matches. You know that the cheaper ammo boxes let the ammo rattle around and get those "rings" on the brass. I ordered some custom cases from Derek at DNA Custom Engraving. Told him what cartridge Id be using and he custom cut these for me. I can flip the case upside down and shake it, throw it on the ground etc. The ammo doesn't rattle around or fall out. And no marks on the brass. It's a dang near bomb proof box theyre in. Pelican to be exact. Give them a look and a shout as they make more than just cases for ammo. Great guy and company to deal with.

https://www.dnacustomengraving.com/