Ranger Custom Enclosures

Ranger Custom Enclosures Take your system to the next level with a custom enclosure! Enclosures typically take 1-2 weeks to design and build.

Each box is made specifically for your subwoofer, power, car and budget to squeeze out every ounce of performance.

06/24/2023

Not only do we make quality boxes but we also test them prior to staining/glossing to insure quality performance. This customers Deaf Bonce 3515R is a monster even on low power (we wouldn’t want to damage a customers subwoofer) and he will be sending it about 4000 watts!

There truly is nothing better than seeing the smile on a customers face! This box is louder, has more range, takes up ha...
01/03/2023

There truly is nothing better than seeing the smile on a customers face! This box is louder, has more range, takes up half the amount of bed space and is twice as strong as his old box. We achieved that with 6 cubes of net airspace ported with 99sqin of port area tuned to 44hz. The two sealed sections are 1.7 net cubes each.

Might want to stay tuned in for this one! building a 4th order blow-through for this customers silverado that will be ho...
12/28/2022

Might want to stay tuned in for this one! building a 4th order blow-through for this customers silverado that will be housing two American Bass XFL 15s. We’re going for low and windy so be on the lookout for videos in the near future!

Another one ready for sanding and staining. 41.25sqin of port area, tuning of 34hz with 2sqft of net airspace will make ...
12/03/2022

Another one ready for sanding and staining. 41.25sqin of port area, tuning of 34hz with 2sqft of net airspace will make this one very musical box👌

This has been a fun one. 3:1 4th order for a pair of B2 Audio Rampage 8s. Each sealed section is 0.3cuft and each ported...
10/18/2022

This has been a fun one. 3:1 4th order for a pair of B2 Audio Rampage 8s. Each sealed section is 0.3cuft and each ported section has 0.9cuft after displacement. Tuned to a nice 46hz. Best part is it’ll fit under the seat of the customers truck!

Only complaint this customer had was that he had to add more sound deadener to his vehicle because his sub got so loud i...
10/18/2022

Only complaint this customer had was that he had to add more sound deadener to his vehicle because his sub got so loud in this box! Sounds like a good problem to have. Holds a Skar ZVX 12 with 3cuft after displacement tuned to 35hz.

Check out this enclosure housing two Digital Designs 712s! 4.5 cubes after sub, port and bracing displacement tuned to 3...
04/26/2022

Check out this enclosure housing two Digital Designs 712s! 4.5 cubes after sub, port and bracing displacement tuned to 34hz. Powered by a Digital Designs M3D with supporting electrical this box got low, bandwidth of 24hz-68hz and is puppy approved!

This one was a beauty! 2.75 cuft with a 6” aero port tuned to 34hz for a Wolfram AU12! Has such a wide frequency respons...
06/02/2021

This one was a beauty! 2.75 cuft with a 6” aero port tuned to 34hz for a Wolfram AU12! Has such a wide frequency response and hits with authority.

This one is ready for some sanding! 0.8 cuft sealed for this Rockford P3 shallow ready to go in a boat.
06/02/2021

This one is ready for some sanding! 0.8 cuft sealed for this Rockford P3 shallow ready to go in a boat.

Address

Warren, MI
48089

Telephone

+15866017996

Website

Alerts

Be the first to know and let us send you an email when Ranger Custom Enclosures posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category