The Original Resinator

The Original Resinator All-in-one Cryo-Sieve�, Bubble While You Tumble� or Cryo-Trimming� with our extraction device The Future of Botanical Extraction! Proudly made in the USA.

Our Resinator is the only all-in-one solvent free extraction product with Wet, Dry & Flash Freeze capabilities. Make kief, make bubble, or trim flowers all with the help of liquid Co2. With our two sizes of Resinator machines, (and two more models in the works), we can accommodate everyone from the mom and pop grower to the largest commercial and industrial operations. Our custom micron screens are Removable, Washable, & Replaceable. Everything you need is included in each Resinator purchase.

HASH CHURCH Season 12 • Episode 22THE CRYO EPISODE Part 2 ❄️🔥Back for Part II, sits down again with founder TJ Arnovick...
05/27/2026

HASH CHURCH Season 12 • Episode 22
THE CRYO EPISODE Part 2 ❄️🔥

Back for Part II, sits down again with founder TJ Arnovick of The Original RESINATOR and partner Rustin Porter along with for a deep dive into cryogenic cannabis processing, cold-chain preservation, solventless innovation, and the future of modern hash making.

We go deep on:
• Cryo-Trim®, Cryo-Sieve® & Nitro-Sift™ workflows
• Live dry sift & fresh frozen processing
• Freeze dried flower and Crop-to-Cure® methodology
• Bubble hash, freeze drying & terpene retention
• Sift-to-hydrocarbon workflows & biomass reduction
• Solventless processing at scale
• Preserving gland integrity through the cold chain

If you’re into full melt, dry sift, bubble hash, live rosin, freeze dried flower, sift-to-BHO workflows, or cutting-edge cannabis processing tech, this is one you don’t want to miss.

Sponsored by Puffco, The Press Club & Bubble Bags

BubbleHash DrySift LiveRosin FullMelt NitroSift CropToCure FreezeDriedFlower FreshFrozen FreezeDry BHO HydrocarbonExtraction CryoTrim CryoSieve

05/20/2026

TheOriginalResinator XLS system, when paired with an hydrocarbon system, creates a synergy that elevates the efficiency of botanical extraction to an unparalleled level. The XLS system is renowned for its ability to handle a variety of biomass with precision, utilizing cryogenic temperatures and centrifugal force to separate desirable trichomes from plant material without compromising quality. This method ensures that the integrity of the resin is maintained, resulting in a pure, potent extract. The system’s versatility allows users to switch between dry and wet (live) resin extractions seamlessly, making it a favorite among professionals seeking high yields with minimal waste.

This video also showcases our dry Cryo-Trim® process, demonstrating how controlled cryogenic handling can rapidly manicure biomass while preserving trichome integrity, color, structure, and terpene profile prior to downstream extraction. ❄️🔥

:

04/29/2026

🌈Rainbow Belts ~2 minute LIVE nitro-sift 150 µm, from fresh frozen sourced bio, grown under full sun. Made w XLS Pro. True solventless…

CRYOGENIC SIFT PROCESSING WORKFLOWCold chain in. Cold chain out. 🥶We’re taking full flower from harvest all the way thro...
04/24/2026

CRYOGENIC SIFT PROCESSING WORKFLOW

Cold chain in. Cold chain out. 🥶

We’re taking full flower from harvest all the way through precision trichome separation without ever breaking temperature integrity. 🌡️🥶

Cryogenic preprocessing with the Cryo Crusher
Refinement through the RESINATOR XLS Pro
Then branching into hydrocarbon or fully solventless pathways

This isn’t theory
This is a repeatable system

Less smear
Higher efficiency
Better inputs
Stronger outputs

Live dried flower
Live and cured sift
Live and cured static sift
THCA
Live/Cured Rosin .industries
Live/Cured Resin

All from one integrated workflow

Get familiar

We’re not tweaking the process
We’re redefining it

04/20/2026

Happy 4:20 🌿

Started as a time,
turned into a code,
now it’s a language
spoken everywhere this plant grows.

From flower to hash to oil,
from soil to smoke,
it’s craft, it’s culture,
it’s more than just a t**e.

Same ritual, different forms,
same plant, endless ways—
4:20 is just the moment
we all pause and appreciate. 🔥

04/18/2026

Nowadays everybody wanna talk like they got something to say…
But nothing comes out when they move their lips, just a bunch of gibberish…
Some folks act like they forgot about Resinator. 🎤🫡

150 lbs fresh frozen. Reduced in 2 hours. ⏳

XLS Pro + liquid nitrogen. ❄️
Taking material down to true cryogenic temps for precision trichome collection while maximizing throughput without sacrificing quality or yield. ⚖️

This is Nitro-Sift™

We’re seeing up to 85%+ efficiency gains across the board.
Half the gas. Twice as fast. Total control.

This single XLS unit can process up to 600 lbs of fresh frozen per 8 hour shift.

This run yielded 24.48% return.
Over 36 lbs of sift from fresh frozen biomass.

Split into two columns, ~17 lbs each.
Ran in ~2.5 hours.

Traditional systems:
~200 lbs in the same 8 hour window.

We more than doubled throughput…
by changing the methodology, not the system.
Sift instead of raw fresh frozen.

If you’re in hydrocarbon and not paying attention to this… you’re already behind. 👊🏼

04/18/2026

2 minute live Nitro-Sift run with The Original Resinator. 👀🫡

Sugarleaf in, heads out. Not full flower, 🚫 water 💦 , 🚫 static ⚡️, and little to no human contact. Just cryogenic gas doing what it does, freezing the live biomass and allowing for clean separation. 💯

From there it goes straight into our HiLyph Edition freeze dryer to lock everything in. Cold chain in, live dried sift out.❄️

It’s like Frenchy bottle tech… just without the mess, the labor, or technical skills. Just grease. 🛢️

You can see the glimmer in the sun… that’s the signal. ✨

This is what controlled, repeatable solventless cryo-processing of fresh frozen bio looks like. ❄️

04/03/2026

Most freeze dryers weren’t built for cannabis.
They were adapted, patched, and pushed past their limits.

Operators already know what comes next:

• Vacuum issues that kill batches
• Temperature spikes that ruin product
• Cycles that stall, fail, or run for days
• Inconsistent results from load to load
• No product probes, you’re drying blind
• Shelf temps that don’t reflect actual product
• Overdrying or partial drying within the same batch
• Pumps failing, oil contamination, constant maintenance
• Machines down when you need them most
• No true process control, just time and temp guesses
• No repeatability from run to run
• Trial and error instead of real SOPs
• No real data to diagnose what went wrong

The reality most operators learn the hard way:

It’s not IF your system fails.
It’s WHEN.

We didn’t retrofit a food machine.
We built a system for cannabis.

HiLyph delivers:

• Built specifically for cannabis, not adapted
• VPC built in, not added
• True multi-step process control over the full lyophilization curve
• Probe-driven recipes that actually repeat and scale
• Integrated product probes, no more drying blind
• Multi-zone heating for batch-wide consistency
• Shelf temps that reflect actual product behavior
• Faster freeze + controlled sublimation (~30 min vs hours)
• Higher throughput with shorter, predictable cycles
• Rapid defrost for faster turnaround
• No external hardware, no patchwork systems
• Bud + hash capability in one platform
• Consistent structure, terpene retention, and finish quality
• Built for SOP-driven operations and scale
• Commercial-grade system designed for continuous use
• Full 2-year top-to-bottom warranty

This isn’t just drying.
This is process control.

If your system can’t keep up, it’s not built for this.

03/26/2026

Most people will scroll this and just see specs. 🔅

But if you actually understand the process, this is where the difference is.

Built-in v***r pressure control 💥
No external hardware ⚡️
No retrofits 🛠️

Programmable drying recipes 👾
Dial it in once. Repeat it every batch ♻️

Rapid freeze & defrost with 3 zoned shelf heating ❄️🔥
Controlled sublimation, not guesswork 💯
Built in probe driven logic 🌡️

Stable vacuum performance and control 🧩
That’s where terpene retention and structure are either preserved or lost 🧬

And it’s not built for just one material ↕️↔️

Live sift 👽
Ice water hash (IWE) 🧊💦
Whole flower 🌱

Completely different moisture and v***r loads
Handled in the same system

From the actual output numbers:

Live sift (XL):
5–7.5 lb per day

IWE (XL):
4.5–7.5 lb per day

Flower (XL):
2–2.5 lb per cycle

Up to 20.05 sq ft of tray space
Up to 10 trays per HASH system

Custom Bud shelf configuration cons standard BUD Dryer

This is where throughput, performance & dependability becomes real

And that’s where ROI actually comes from 💲📈

Consistent output
Across different materials
On the same system

Most freeze dryers can only do one of these functions well, and that’s debatable…
Very few can do all three without compromise 🤝

This is what purpose-built for cannabis actually l👀ks like

If you don’t know… now you know! 🎤

10/19/2025

🌿 Crop-to-Cure®: 3 Years Later… Still Fresh as Day One 🌿

This flower was harvested in 2022, fresh frozen straight from the field, and stored deep for 3 years. In 2025, we pulled it from the freezer and ran it through our full Crop-to-Cure® process. Powered by Cryo-Trim® and lyophilization.

The result? Perfectly dried, preserved, and smooth-smoking flower that’s as vibrant and loud as the day we cut it down. Not hype… science.

🎤 Zainy Baller Style

💨 The Original Resinator is the cornerstone.
🧊 Cryo-Trim® is the method.
⚗️ Lyophilization is the science.
🔥 Live Dried is the future.

Address

3620 Airway Drive
Santa Rosa, CA
95403

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+18777374628

Website

Alerts

Be the first to know and let us send you an email when The Original Resinator posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Original Resinator:

Shortcuts

Share

Category