Slatin MotorGear

06/17/2024

Website in English/Spanish

04/01/2024

We are back!

02/04/2024

At our Store, we sell High Quality Motorcycle/Bike Jackets, Pants, and Gloves at Low, Factory-Direct Prices. Almost everything we sell has been designed and manufactured in our own factory.

In 2016, I saw that the really high quality gear was very expensive. So, we bought our own factory, cherry-picked the best of the product features, then designed and manufactured our own line of gear.

If you’re thinking of buying great gear but don’t like the high prices, you owe it to yourself to at least look at our products. I promise you will be happy that you did.

—Richard Slatin, Owner

01/27/2024

Keeping you warm, dry, and looking great. High Quality Gear is finally Affordable.

04/04/2023

Almost ready...SMG Micro Air Conditioner. Solid State, 12vdc; made for helmet cooling in hot climates. For construction workers, motorcyclists, military, and medical uses.

12/29/2022

I've upgraded my 3d printer, so this one's for sale!

FLSUN SR Super Racer 3D Printer Fast 200mm/s 2800 mm/s² FDM Delta Linear Rail Pre-Assembly with Auto Leveling Resume 1.75 PLA DIY 3D Printers Printing Size 260x260x330mm/10.2x10.2x13 Inch ---SELLING...

10/07/2022

A Great Cooling Option under $75!

With two 3D Printers, there’s typically one printing and the other not. That usually means it needs attention for recalibrating or more filament,etc. learning to prototype in 3D added, literally, a year. That was just to learn how to software create and how to print. I bought the latest printer a couple of months ago (Flashforge Adventurer 4), which I’ll be selling as soon as our Bambu Carbon X1 3D Printer arrives. Interested parties for the Flashforge should pm me through Facebook Messenger.

Ok? So, we are stilllling Riding Jeans, but I ship those out personally, so I can make sure it has the correct protectors included. Amazon goofed that up and I reported that to them; so, they shipped all jeans back to me.

Well, in the USA and seasonably hot parts of the world, we got through another summer. While I plan on the Helmet A/C being available then, I took notice of other cooling units, particularly those that hang around the neck. First the tec; it uses the same technology I’m using for the Helmet A/C. But, there are LOTS of these units now online for sale; Amazon and EBay included. I tested a lot of these, even riding with those that can be worn with a helmet; and have findings to report. First, the cooling effect requires lots of DC electricity.So, units with batteries less than 5000 amp hours—-forget those! Three critical factors in the decision are battery equal or more to 5000 amp. hours with ability to use with a powerbank battery of at least 10,000 amp. hrs. while in use; giving you 😚 hours of cooling use.

Next, the aluminum ‘pads’ that get cold must cover your carotid arteries, on each side of the neck. These cool the blood flowing to your brain, then circulate through your body, cooling you down. Finally, a good fan with 3 speeds. After a couple of minute’s use, you stop noticing the cooling effect. BUT, you’ll notice that you stopped perspiring. Yep, it works great!

In all my testing, only -1- make and model performed this well. I may carry it, selling it for under $75. It’s got some other cool features, which I’ll say more about in the next post. A photo of it is below.

07/24/2022

Now that we’ve settled into Amazon’s virtual marketplace, there’s time complete the prototype of an micro air conditioner for helmets. With this year’s heatwave, it sure is needed!
We’ve decided, that for such a small device, it’s internal components could also strengthen the integrity of it; much like a motorcycle with an exhaust line also part of the frame’s structure.

Here’s a photo, taken just now, of the “cradle” being formed in one of our 3D Printers. The cradle will contain the system and it’s electronics. This will allow for easier assembly of the unit during production. QuestionS, anyone?

Richard Slatin

05/08/2022

We're exploring an idea...the Reevu Rear View helmet, made from 2008 to 2017 really let you see the traffic behind you, eqsily, without batteries or camera. It rqised the bar on rider safety.. They sold full face and modular models under USD$500. Today, it's about cameras, batteries,and electronics in-helmet, raisins prices to USD$800-2500. Reevu's à great helmet...I use it regularly. SO, WHAT SO YOU THINK? Should it côme back? Leqve comment below, please!

04/11/2022

Interested in something like this?

In this video, you'll learn how quick and easy it is to mount your EMBLEMS from Slatin MotoGear.

03/24/2022

This weekend, we’re opening our first SMG Amazon Super Store with Super Savings. Save even more and with free shipping. Come Visit!

slatin motogear, motorcycle jackets, warm winter motorcycle jackets, textile and mesh motorcycle jackets, leather and mesh motorcycle jackets, biker jackets, motorcycle gloves, leather biker gloves, kevlar armored motorcycle jeans, kevlar armored biker jeans, smg motorcycle wear, smg biker clothing