What are the opening hours?

Monday 6pm - 8pm Tuesday 3pm - 7pm Wednesday 2pm - 7pm Thursday 6pm - 8pm Friday 8am - 5pm Saturday 9am - 3pm

East Texas Precision

Name: East Texas Precision
Address: Mount Pleasant, TX, 75455, US
Telephone: +19033090607
Price range: $$

Home
United States
Mount Pleasant, TX
East Texas Precision

Licensed manufacturer and seller of fi****ms, specializing in custom bolt-action rifles

04/15/2026

Another tack driver is born! Customer looking to harvest his Lone Peak Fuzion out of another rig and re-imagine it as a dedicated NRL Hunter setup. We sourced the PROOF Research 24" Sendero 8-twist carbon barrel and chambered it in house in 6.5 Creedmoor to less than .001" tolerance, then threaded the muzzle and hand-cut the crown. Barreled action and bottom metal then Cerakoted OD Green to match the same color in the stock. Nestled into a brand new MDT CRBN fully adjustable stock with integrated full-length ARCA rail. Jewel trigger set to 14oz. Rig is topped with an AWESOME Valdada Optics Mini G2 MIL scope featuring unrivaled SCHOTT German glass and Light Optical Works (LOW) Japanese mechanicals, (same production line as Nightforce and others). Area 419 Match rings lock it down tight! The end is tipped with a Thunderbeast Ultra-7 titanium suppressor and Cole-Tac heat shield. Target pic is rounds 2, 3, and 4 of factory Hornady Precision Match 147 grain ELD-M pills. Customer wasted no time and brought the rig to our NRL Hunter Games match last Sunday at White Oak Creek Shooting Range , shot lights out and took home the banner in the teams category (rig in action with the attached photo...)

01/29/2026

Ready to ROCK some NRL! This dedicated rig is the pinnacle of Open Division for NRL Hunter. Pure Precision SKLTN-Ti Titanium action with a PROOF Research Sendero profile 7.5-Twist 24" Carbon Fiber barrel, nestled into a Manners Composite Stocks MCS-TCS-MAX competition stock with integrated minichassis and full-length ARCA rail. Triggertech Special go-switch dialed to 14oz. Topped with UNREAL Valdada Optics 4.5-28X Mini G2 scope featuring crystal-clear German SCHOTT glass held in place with a pair of MDT Elite 34mm rings. We chambered the rifle in 25 Creedmoor for an ideal balance of ballistics vs. recoil, launching 135gn Berger Bullets Long Range Hybrid Target pills at 2866fps with tight ES/SD. That speed gives us a power factor near 387K, easily meeting the NRL Hunter minimum. We tipped the barrel with a Cortina Precision muzzle brake, looks like setting '1' or '2' will work fine! Even with the stout MDT triple pull bipod she makes weight with some to spare! Recoil is VERY manageable to spot those downrange shots for accurate corrections. Going to work this baby hard this season!

12/09/2025

"Nice pair ya' got there!" Customer brought us an old pawn shop Rem 700 chambered in 270 Win and asked about making it into a 7mm-08. We said sure, but that's a long action receiver so we could encounter some feeding issues. He changed the plan, asked to rebuild the old donor into an upgraded 270 Win and just go ahead and build up a cousin 7mm-08 rig from scratch! Both are sporting GRAYBOE Phoenix 2 stocks with full-length ARCA rails, PROOF Research carbon barrels, Triggertech Diamonds and Leupold scopes. We stripped the Re*****on, degreased/ultrasound bathed all receiver and bolt parts, trued the action, modified the factory bolt k**b by threading the handle and installing a Badger Ordnance spiral flute model, and added a 20MOA pic rail. The 7mm-08 is based on a Pure Precision Summit short action. All machining performed in house to less than .001" tolerances. Both barreled actions were then Cerakoted black satin for all-weather durability and great looks. Finished load development on the 7mm-08 (tan stock) today, it's loving Alpha brass and Berger 168gn Classic Hunters printing super tight groups with outstanding ES/SD. (Please DO NOT use the pictured load in your rifle right off, start with a charge several grains lower and work up gradually!) Waiting on components to work up a load for the 270 as well. Customer is not waiting...the 7mm-08 is headed out on the hunt this weekend!

10/19/2025

NOW he's ready... Customer brought in a lightly used Bergara B-14 chambered in 7mm PRC that he bought with plans to use it on his first ever elk hunt out West, said he wanted to be ready to shoot 500+ yards if necessary and needed a scope. We mounted up a sweet Nightforce Optics NX-8 4-32X model in a set of rock-solid Area 419 Match rings. This customer uses factory ammunition, and the problem was the rifle wouldn't group any better than 4" at 100yds with premium stuff. No problem...we rebarreled the rig with a new PROOF Research 24" sendero profile 1-8.4 Twist carbon barrel (machined in house to less than .001" tolerance), removed some material from the barrel channel to free-float back to the recoil lug, tipped the muzzle with a far superior Area 419 Hellfire brake, and slipped on a Beartooth Products comb-raising kit (perfect for these non-adjustable stocks) to give him a good cheek weld. Finished the upgrade with a slick Spartan Javelin Pro Hunt Tac bipod. First rounds down the pipe with Federal Premium cartridges launching Hornady 175 ELD-X pills grouping sub 1/2-MOA with good SD/ES. Watch out Mr. Bull, here we come!

07/19/2025

Packable and Potent! Customer came asking for us to build an ultralight 7mm Sherman Short Magnum for big game as well as NRL Hunter matches. This puppy checks all the boxes. Lone Peak Fuzion Ti Titanium action with PROOF Research 24" Sendero profile Carbon Fiber 1-8 Twist barrel. All machining performed in-house to less than .001" tolerances. Settled into an MDT Sporting Goods HNT26 Folding Carbon Fiber Chassis. Triggertech Special set to 1lb. Awesome Nightforce Optics ATACR 5-25X scope supported by Spuhr AB Rings. No such thing as factory ammo for a Sherman...we handled load development with our Area 419 Zero Gen 2 press using Rich Sherman's ADG Brass, LE Wilson micrometer seating die, Berger Bullets 180gn Hybrids and Hodgdon Powder H1000. The Cortina Precision Tuner brake fine tuned our groups down to sub 1/2MOA with tight SD/ES. We're getting 2870fps yielding a power factor over 516K...blows the NRL Hunter minimum of 380K out of the water. The rig with magazine inserted weighs in at just over 9.5lbs! Ready for action on the firing line and in the field...

06/08/2025

Fetching top dollar...Each year we build a custom rig and donate it to the Titus Regional Medical Foundation annual Gala fundraising event. This year's proceeds go to renovating the Pediatrics unit at the main hospital. We put together this stunner...a Re*****on 700 action featuring a PTG 1-piece bolt with modified k**b and M16-style extractor, coupled with an Outlier 24" MTU contour barrel chambered in 6.5mm Creedmoor and tipped with a 3-port brake. Added a Triggertech Special at 1lb and nestled it into a KRG Bravo chassis with front pic rail and short ARCA rail in front of the magazine well. Topped off with a clear Arken Optics USA EP-5 7-35X scope in their rings w/ throw lever and level and clamped it into an Athlon Optics CF29 Carbon Fiber tripod. Our colleagues at In the Pines Gunworks applied this AWESOME eye-catching custom camo Cerakote. The rig feeds Hornady Match ELD-M 147gn rounds flawlessly out of an MDT AICS 5-round magazine and is printing sub-1/2 MOA groups. This shooting system was the top earner during the live auction portion of last night's event! We're proud to be supporting this great cause once again.

06/02/2025

Everything you need, and nothing you don't. Customer asking for a rock-solid 22 Creedmoor at home on the bench or in the field. This sleek number gets it done. Pure Precision Summit action mated to an MTU Contour 1-7.5 twist Bartlein steel barrel at 26", chambered to less than .001" tolerance. Nestled into a Grayboe Phoenix 2 stock with their proprietary full-length ARCA rail. Tipped with an Area 419 Hellfire Match brake and wearing a Triggertech Diamond trigger at 1lb. Crisp Leupold Mark V HD scope in a pair of sturdy Spuhr rings. Odin Works Prizm bipod supports the front end. Custom color Cerakote to match the stock brings it all together. We handled load development for the customer as well, launching Berger 80gn VLD pills at 3480fps into one ragged hole with a tight SD/ES, (really liking Wi******er Staball 6.5 powder for these lately). Customer came out for his test shoot and after one wind correction at 482yds proceeded to center punch the plates at 540yd, 650yd, 730yd, and 800yd effortlessly. Yotes beware!

04/15/2025

Good 'ol 308..ELEVATED. Customer looking for a maneuverable, accurate truck rig for hogs, coyotes, and general ranch use. Hard to beat the venerable 308 Wi******er! Re*****on 700 action with modified bolt k**b, featuring PROOF Research carbon 18" 1-10 twist barrel. Nestled into a custom GRAYBOE Phoenix 2 stock with adjustable cheek rest, pic bipod rail, and short ARCA rail for tripod use. Installed Triggertech Special set to 1lb, then topped with a Huskemaw Long-Range Optics Blue Diamond 5-20x scope. Tipped with all-Titanium Thunder Beast Arms Corporation Ultra-7 can. Black satin Cerakote ties it all together. We sent some factory Federal Premium Gold Match 168gn Sierra MK rounds down the pipe, cloverleaf groups with TIGHT SD/ES. Custom turret on the way from Huskemaw, this baby is ready to ROCK.

02/24/2025

Last one headed into the field. Number 8 of 8 Texas Ranger duty sniper rifles rebuilt and ready for action! (This one is heading to Houston). Each was disassembled completely, action ultrasound bathed, threads chased, bolt components serviced. Barrel replaced with Bartlein MTU contour 1-10 twist chambered in 308 Wi******er to within .001" tolerance, trimmed to 20" length, crown hand cut. Triggers upgraded to Triggertech Specials. Exposed steel custom color-match Cerakoted to blend with the AI ATX chassis. Assembled/Torqued to spec, properly lubricated. Scope precision mounted. Finishing touch brand new Thunderbeast Ultra-7 Titanium suppressors. All rifles holding 0.5 MOA or better groups with factory Hornady TAP 168gn A-Max ammunition, with tight SD/ES. East Texas Precision is EXTREMELY proud to have been trusted with this critically important work.

02/09/2025

Southpaws are people too! Customer brought us his "unicorn" find...a Kelbly's Prometheus short action in a left-hand configuration, asked us to create a top-shelf PRS rig. Bartlein MTU contour stainless 8-twist barrel at 26", ultra-precision chambered in 6.5 Creedmoor with a hand-cut crown then tipped with Area-419 Hellfire Match brake and settled into an MDT ACC-Elite chassis in FDE. Added Triggertech Diamond left hand trigger at 12oz and crystal-clear Nightforce ATACR 7-35x glass. Exposed steel Cerakoted satin black brings it all together. First few Hornady Match factory rounds down the pipe already showing promise with good group and tight SD/ES. Ready for our first PRS match of the season at White Oak Creek Shooting Range

Address

Mount Pleasant, TX
75455

Opening Hours

Monday	6pm - 8pm
Tuesday	3pm - 7pm
Wednesday	2pm - 7pm
Thursday	6pm - 8pm
Friday	8am - 5pm
Saturday	9am - 3pm

Telephone

+19033090607

Website

http://www.easttexasprecision.com/

Alerts

Be the first to know and let us send you an email when East Texas Precision posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to East Texas Precision:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Shop in Mount Pleasant?