VelociArms

VelociArms At VelociArms, we forge tools of unmatched precision — crafted by two generations of U.S. veterans and tailored to your mission.

Veteran-owned and built on a legacy of discipline and craftsmanship. VelociArms — Because “Good Enough” Isn’t.

05/11/2026

🎥 Behind the scenes on Roger’s 25 Creedmoor build!

Cherise is laying down the first layer of coating while the barrel gets spun for that flawless, even finish 🔥 Precision matters in every step, and this one is coming together beautifully.

More details and finishing touches still to come on this custom build — stay tuned! 👀🔧🦖

🔧 After test firing, it was time for an upgrade. The factory Tikka trigger has officially been replaced with a TriggerTe...
05/08/2026

🔧 After test firing, it was time for an upgrade. The factory Tikka trigger has officially been replaced with a TriggerTech flat trigger for an even cleaner break and more consistent feel.

Small changes make a big difference when you’re chasing precision. This 25 Creedmoor build keeps getting better one detail at a time. 🎯🔥

05/07/2026

🎯 First shots down range with the Tikka T3X 25 Creedmoor build!

This custom setup is officially in the test fire stage and showing some serious promise already. 🔥 From precision machining to final assembly, it’s always rewarding seeing a project come alive behind the trigger.

Smooth cycling, clean function, and that 25 Creedmoor performance never disappoints. More tuning and range time ahead, but we’re liking what we see so far. 👊

Big things coming out of the VelociArms shop. Stay tuned for accuracy results and more behind-the-scenes footage!

05/07/2026

Test firing the 25 Creedmoor build.

05/07/2026

Test firing the 25 Creedmoor.

🔧 Small adjustments. Big impact. 🔧Here’s a quick look after dialing in the magazine release on this .25 Creedmoor build....
05/05/2026

🔧 Small adjustments. Big impact. 🔧

Here’s a quick look after dialing in the magazine release on this .25 Creedmoor build.

This stage is all about feel and function—making sure everything locks in solid and runs smooth when it matters most.

✔️ Positive engagement
✔️ Clean release
✔️ Confidence in every reload

We’re getting this one exactly where it needs to be… not rushed, just right. 🎯

🔥 Precision where it matters most. 🔥We just wrapped up the muzzle work on this build — cut with 5/8x24 TPI threads and f...
05/05/2026

🔥 Precision where it matters most. 🔥

We just wrapped up the muzzle work on this build — cut with 5/8x24 TPI threads and finished off with a clean 11° protected crown.

This is where performance meets craftsmanship.
✔️ Smooth, concentric threading
✔️ Crown geometry designed for consistency
✔️ Built to deliver repeatable accuracy shot after shot

Every detail counts… and this one’s dialed. 🎯

Dialing in the details 🔧Taylor just fit the magazine latch on this 25 Creedmoor build—and it’s locking up exactly how it...
05/04/2026

Dialing in the details 🔧

Taylor just fit the magazine latch on this 25 Creedmoor build—and it’s locking up exactly how it should. Smooth, secure, and ready to run. 💥

It’s the small things that make a big difference in reliability and performance.

This one’s coming together piece by piece… and it’s going to be a hammer. 🔥

Tenon is to length ✔️Chamber is looking beautiful 😎🔥This 25 Creedmoor is coming together exactly how it should—clean thr...
05/04/2026

Tenon is to length ✔️
Chamber is looking beautiful 😎🔥

This 25 Creedmoor is coming together exactly how it should—clean threads, true shoulder, and everything lined up for precision.

Details matter… and this one is going to flat out perform. 💥

Stay tuned for the next step. 👀

🔥 Today the 25 Creedmoor build is in the lathe getting the fine tuning it deserves. This Proof Research competition prof...
04/29/2026

🔥 Today the 25 Creedmoor build is in the lathe getting the fine tuning it deserves. This Proof Research competition profile barrel is being dialed in with precision, patience, and attention to every thousandth.

No shortcuts here—just careful machine work and a commitment to accuracy from the ground up. Stay tuned as this custom build keeps coming together.

Address

46 West Harmon Drive
Mitchell, SD
57301

Opening Hours

Monday 12am - 4am
Tuesday 10am - 5pm
Wednesday 10am - 5pm
Thursday 10am - 5pm
Friday 9am - 4pm
Sunday 11am - 3pm

Telephone

+12104458658

Website

Alerts

Be the first to know and let us send you an email when VelociArms posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to VelociArms:

Shortcuts

Share

Category