Arcane Inc.

Arcane Inc. Manufacturer of Guitar and Bass pickups.

Pickup Winding Class  #15 is this weekend at the Roberto Venn School of Luthiery in Phoenix Arizona.  Well over 200 stud...
03/20/2026

Pickup Winding Class #15 is this weekend at the Roberto Venn School of Luthiery in Phoenix Arizona. Well over 200 students have attended this long runnig class. I will go over every step of pickup manufacturing with the students including hand winding and each student will complete at least 2 pickups with the option to do additional pickups. If you are interested in this class the next one will be the first week of November 2026 (we do classes every 6 months).school.of.luthiery
guitarbuilding

This is a 1963 Fender P Bass that came in for a rewind.  The pickup belongs to Tim Leferbvre  and was Removed from the B...
03/07/2026

This is a 1963 Fender P Bass that came in for a rewind. The pickup belongs to Tim Leferbvre and was Removed from the Bass by Ryan
One coil was dead and could not be saved. The wire had to be removed and rewound by hand with 42 Plain Enamel and then potted in laquer. Some interesting notes about this pickup: the bobbins were very full and the final DC resistance was 11.5k which is higher than the standard spec on most P pickups. Replicas are available, just order one of my P pickups and ask for the 1963 spec.
#1963

1957:  The 57 Experience P-90 by Arcane Inc. in distressed nickel.  Alnico 5 8.5K wound on a vintage mechanical winding ...
01/21/2026

1957: The 57 Experience P-90 by Arcane Inc. in distressed nickel. Alnico 5 8.5K wound on a vintage mechanical winding machine. Engraved base plates and individually serial numbered. They are also Quieter if grounded to the pots.
#1957

01/19/2026

This is a 1970 Univox 4001 Rickenbacker Bass Replica Neck pickup out of a Bass that belongs to Jimmy Vivion The pickup was very microhonic and made excessive noise any time the pickguard was touched. The pickup made a hollow clicking sound any time I tapped on the cover so I tightened down the screws holding the cover down and potted the pickup to deaden the whole pickup then Jimmy put the pickup in the wax for 10 min. Another interesting aspect of this pickup is the large ceramic magnet it has. The magnet gave this pickup a pretty hot output combined with the 8k DC resistance it has. According to Jimmy the pickup sounds really good and the Univox is a really nice bass.

01/01/2026

The Arcane Inc. George Lynch Humbuckers are available. We have them in Zebra, Black and Parchment with non aged and the Wartorn finishes. Alnico 8 trem spaced and 4 conductor. If you haven’t tried Alnico 8 you need to, It has almost the magnet strength of Ceramic so it hits the amp hard but the high end is sweet or pretty sounding and never harsh.
We also have the Mr. Scary single coils in stock so you can have a complete HSS or HS set for your guitar.
.inc guitar guitarpickup espguitar espguitars customguitar guitarra guitarparts guitarporn 80sguitar guitarhero shredguitar superstrat dokken lynchmob mrscary mr.scary georgelynch

12/26/2025

The Phil X PX100 by Arcane Inc. In stock and shipping world wide. Tested and approved by Phil X of Bon Jovi. A no compromise p90 in a Humbucker footprint. Alnico 5 12.5k, engraved and serial numbered, this one is number 420.
.inc guitar guitarra p90 guitarparts customguitar guitarpickups p-90 p90pickup singlecoil guitarpickup guitarpickups guitarporn handmade

12/15/2025

This is a vintage 1957 Gibson p-90 that came in for repair from Norik Renson. There is no reading on the coil and the bobbin is cracked and bowed. I will try to reconnect the leads and peel back some of the wire to see if I can save the coil, but I suspect the pickup has an internal break from the bobbin cracking and shifting. If the coil cant be saved I will rewind the pickup on our vintage mechanical winding machine with 42 Enamel wire just like what’s on there. A full video of the repair / rewind will follow.
.inc -90 -90

Pickup winding class  #14 this weekend at the Roberto Venn School of Luthiery in  Phoenix Arizona.  If you didn’t make t...
11/07/2025

Pickup winding class #14 this weekend at the Roberto Venn School of Luthiery in Phoenix Arizona. If you didn’t make this one the next one will be in April 2026.school.of.luthiery

.inc

10/05/2025

The 59 Experience Tele bridge pickup. Alnico 5, staggered magnets, 8.31k and wound by hand. This one has white string but we also build them with black string. A slightly beefed up tele bridge pickup that has just enough push to hear the sweet spot and avoid excessive highs.Available at arcaneinc.com, Reverb Ebay and through our dealers.- #1959

The 51 Experience Tele Bass pickup in our distressed finish.   A hand wound replica of an original that we rewound and a...
10/01/2025

The 51 Experience Tele Bass pickup in our distressed finish. A hand wound replica of an original that we rewound and analyzed. Made the old way in every way. These are available on Arcaneinc.com, reverb and ebay.
-
#1951 #1952

This is a 52 Tele Bass pickup rewind I did for  The coil gave no reading and the fiberboard was about to come loose from...
09/27/2025

This is a 52 Tele Bass pickup rewind I did for The coil gave no reading and the fiberboard was about to come loose from the magnets which shifted the coil and caused the failure. I removed the wire and reinstalled the fiberboard on the magnets, glued the magnets in place, dipped the coil form in lacquer, did some additional insulation and rewound the coil by hand with Enamel wire. Word from Joe was it sounds good.
These are available on Arcaneinc.com, reverb and ebay.
-
#1951 #1952

Address

Los Angeles, CA

Alerts

Be the first to know and let us send you an email when Arcane Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Arcane Inc.:

Share