Sound Shoppe nyc

06/04/2026

04/28/2026

STRETCH WEAVER'S AVAILABLE NOW!
Side Chaining, Granular Effects Box

The Stretch Weaver has 2 separate channels that can interact with each other in various ways, mostly through side-chaining where a channel can trigger an action that will be applied to the other channel.

stretch
Each channel can trigger the other to get time stretched. The louder the signal, the longer the stretch. The ctrl k**b adjusts the max time stretching overall available.

weave
Only the right channel is being stretched but the left k**b will allow some of the left audio to get weaved in and processed on the left.

repeat
Each channel can trigger the other to loop the last recorded sample.

tape
Each channel can change the speed at which the other channel is being played back.

pitch
Each channel can change the pitch of the other.

glide
Each channel can trigger the other channel to glide from a very low, almost inaudible pitch up to unison.

gate
Each channel goes through a gate that only opens when the other channel triggers it.

ringmod
Each channel can ring modulate the other. When you turn up the ctrl k**b the two incoming audio channels will start to get mixed together before being routed to both ringmod processes, so that each channel will increasingly be able to modulate itself.

While it is a dual channel pedal intended to be used with 2 audio sources, if you only plug something into the right channel it will be routed to the left channel so that you can still make sounds (stereo if you wish) and trigger the effects.

04/16/2026

Now, Synergy and Marshall have teamed up once again to bring you, for the first time ever, this legend in a three-tube, dual-channel preamp module. Utilizing Marshall’s original circuit design, the JCM 800 module delivers the raw energy, attack, and articulate overdrive of the iconic vertical-input 2203/2204 amplifiers. Whether you’re chasing the three-dimensional crunch of 80s rock or crushing tight gain for modern metal, the JCM 800 module gives you the legendary tonal experience that defined a generation.

03/19/2026

"ORBITS" is back in the states.
Phil has put the fun back in granular synthesis with the most intuitive "k**b based" ( no programming) design that we know of here at Sound Shoppe NYC.

03/10/2026

We have a fresh wall of "Enieqma" if anyone's been waiting for one!

Enieqma packs a 5-band full parametric EQ, a ‘simple EQ class’ featuring 7 classic tone stacks (Baxandall, Tilt, Fender, Marshall, and Vox amps tone control, etc.), and a 3-band midrange equalizer that emulates the Pultec Midrange EQ processor. Enieqma offers unprecedented equalization capabilities in a pedal format.

Enieqma features true stereo EQ processors. The Left (L) and Right (R) channels EQ parameters may be linked or set independently. The high-contrast display provides invaluable visual feedback and spectral information by rendering the stereo EQ curves simultaneously. Flexible input/output routing options augments the stereo capability even further, allowing seamless connections with other mono and stereo devices.

Two different the EQ engines can be stacked and run together, a powerful concept that allows users to construct more elaborate tone shapers while benefitting from the best aspects of the individual EQ mode.

Enieqma features a stereo Limiter as an optional processing element that you can use to catch peaks or transients from your signal and regulate them to a specified level, this keeps the output signal from clipping, which may occur with high EQ gain settings.

​The Stereo Expander is another optional processing element that can be used to enhance the stereo image of a mono input or a stereo input signal.

02/06/2026

One Left.
"Double Tape T"

Double Tape T is a true stereo/double mono version of the advanced broken tape deck emulator. It’s basically two original Tape T circuits in one larger enclosure with separate true bypass footswitches and a parallel (stereo)/series (double mono) switch to be used in different applications.

Each Tape T circuit takes you clean signal, applies lofi filtering and clipping, add noise and clicks. Separate dry and wet mix controls allow to add as much lofi to your original sound as needed. If you want more – there is a dedicated unique ‘burnt tape’ mode which sounds just like it’s called.

Each circuit has a built in digital comparator Tape Fuzz combining lots of gain and low end boost with a very reliable noisegate while providing a very long sustain.

Tape Engine of both circuits can modulate pitch and amplitude of your signal with two tap tempo multiwaveform lfos.

There is one pitch modulation/vibrato mode, controlled by its own lfo and varying from slight jumping vibrato to complete pitch destruction, broken tape style. You can also modulate this lfo’s depth or speed via the second lfo to add some unpredictability and life to your tape chewing vibrato.

Both lfos can modulate the signal’s amplitude in any of two modes – pretty straightforward amplitude tremolo, lowering the volume of wet signal or new reverse tremolo, adding gain to the wet signal under control of the lfo.

A FSR (force sensitive resistor) touchpad is connected directly to main chip’s clock for manual wobble, flutter and tapestops.

Vibrato, FSR clock manipulation, amp and reverse tremolo and lfo1’s pitch or depth modulation can be applied simultaneously.

The k**bs and switches interact with each other so if you enjoy twiggling the controls while you play you will be getting very unique and strange sounds. Or get lost.

Double Tape T features some more possibilities than the original. Beside true stereo operation with separate bypass and tap tempo controls it allows to syncronize either lfo3 and lfo4 (two lfos of the left channel) to lfo2 (of the right channel) and switch the whole pedal to series/mono operation.

01/07/2026

Happy to have one left of Twin Peaks by after a succesfull drop today.
I get to take a few product shots on the back porch😃

Twin Peaks is a tremolo that consists of two separate analog audio paths whose volume can be modulated.

One is a low-pass and the other a high-pass filter.

When you modulate both in sync it sounds like a regular tremolo where the whole audio spectrum is modulated at once.

When you modulate them out of sync your output signal will pan from the low pass to the high pass signal and you will get interesting phasing effects where the two filter curves meet.
This is what is usually referred to as a harmonic tremolo.

While the Tap tempo and LFO functions are digital, the audio path is 100% analog. The tremolo effect is achieved using optocouplers.

11/04/2025

The new JMP module is here and it is SICK!!! Here’s a demo showing you 4 rad tones, from mean to clean. Yall know I love the Synergy stuff, and this is quickly becoming one of my favorites. Which is your favorite tone here?

11/02/2025

From the monolinthic "Double Tape T" is back in stock!

Double Tape T is a true stereo/double mono version of the advanced broken tape deck emulator. It’s basically two original Tape T circuits in one larger enclosure with separate true bypass footswitches and a parallel (stereo)/series (double mono) switch to be used in different applications.

11/01/2025

restock (our spookiest pedals)
Just in time for Halloween! 🎃

Featuring "The New Kilter"
Modulating effects loops!