We offer vinyl letterings, logos, car decals, wall art , and more. ~How to place an order
Pick out your logo or your design, decide on your choice of colors from our wide variety of colors, choose a font , a size, and make a payment and we get to work on your decal. We accept payment through paypal and checks. All Decals can be put on walls, vehicles, or any smooth surface. Choose from Permanent
or Removable for walls. Easily removable with no residue. Perfect for DIY enthusiast!
~How To Apply a Vinyl Decal
Each decal has three pieces:
1. The top layer is the transfer tape
2. The middle layer is the actual vinyl decal
3. The bottom layer is the backing
These decals come to you all together in three layers. The top layer is called transfer tape. It looks somewhat like regular masking tape or clear tape. And is used to apply and protect you decal as you apply. The middle layer is the actual decal. And this will come up with your transfer tape when your ready to apply. The bottom layer is a backing paper with a waxy surface.
~Quick Vinyl Application Tips
Completely clean and dry area. For best results, do not use a cleaner that will leave behind a residue. Do not apply in cold weather , the adhesive may stick but will lift easily and that's not cool :(
Do not apply in extreme heat, apply in the shade. The vinyl will get very soft and stretch and that bites! Surface temperatures MUST be between 50 and 90 degrees Fahrenheit before attempting the installation. As a general rule, if the surface is hot to the touch it's over 90 degrees Fahrenheit. Adhesive becomes brittle when it gets too cold and gummy when it gets too hot. Applications outside the recommended range of 50 to 90 degrees Fahrenheit reduce the adhesives' ability to perform. Do not use ice scraper, or finger nails on the decal, it may lift or break pieces off. Keep the transfer tape on the decal and burnish with your credit card, library card, your Food Lion Mvp card, popsicle stick, or squeegee)
Do not touch the adhesive backing - oils from your skin will prevent sticking. Before application make sure there is no wax or rainx products on the surface , this is similar to cold weather because the adhesive may/will stick but will lift easily. Don't apply wax over graphics, especially if the wax contains any petroleum distillates. Gently peel the transfer tape off of the vinyl at a 45 degree angle. ( if the vinyl decals starts to come off with the transfer tape, lay area back down and burnish the decal.)
