06/17/2026
For those following along with my adventures in making poppers using synthetic cork, I have found a way to effectively deal with the fuzz left behind by sanding this material. Several of you mentioned in one of my first posts on the subject that applying thin CA glue and then sanding would leave a smooth finish. The technique works extremely well!
The first photo is a finished size 8 popper for panfish. The end result is a smooth, glossy finish. The second is the popper body, which was coated with the glue, allowed to dry, and then sanded down with an emery board. The last photo shows the "fuzz left behind after sanding, an example of the problem the CA glue fixed.
I could get a smoother finish with fine sandpaper if I wanted to, but this process took seconds instead of minutes. My goal here is to quickly create fishable poppers to fill some holes in my boxes, not to make works of art.
Sorry, the photos are not of the best quality. A storm knocked out power today, and the natural light in my basement tying room sucks!