Stratton Custom Rifles

Stratton Custom Rifles I build custom rifles to extreme tolerances. I inspect every component thoroughly to make sure your rifle gets every ounce of accuracy possible.

Quality is checked with indicators at every step. I’m a one man shop & stand behind every rifle I build.

Great rifles aren’t built around any one single component.They’re built when the best  components come together as a com...
06/17/2026

Great rifles aren’t built around any one single component.

They’re built when the best components come together as a complete system. Each one installed with care and attention to detail.

Every part has a specific job and the parts and companies we endorse we don’t do so lightly.
Every detail matters when the end goal is confidence in the System.

Defiance Machine
McMillan Stocks A6-7
KMW Long Range Solutions
Custom Rifle Barrels
Hawkins Precision
Accurate Mag
TriggerTech Diamond
RRS ® SOAR
Nightforce Optics

06/15/2026

Again these are all powder ladders at 100 yards.

10 shots for each group, covering 4.5gr of powder, each shot .5gr higher than the last, covering around 200fps spread.

Each bullet shot with 2 different powders on this particular test.

I’ve never ran more than 4 combos out of any of my rifles so this is very interesting. So many of these are shooting so well that I’m not sure what combo I’d pick. The rifle is extremely heavy and running on a phoenix bipod and Edgewood rear bag so it’s more stable than most setups I’ve tested in the past.

This rifle setup is either better than others I’ve done in the past or this barrel was a hummer. Regardless this rifle is shooting extremely well.

06/12/2026

I can’t tell you guys how grateful I am to be able to do this every day and have your guys support. Thank you to all my customers past, present and future.

The data we’re collecting and experience gained is drug dreamed about.

And week down and other hammer born and more data and testing conducted.

God is good!!

06/11/2026

7 MAX from Sherman Wildcat Cartridges cartridge guide update.

Finished the seating depth testing and just started into the powder ladders and man is it off to a good start!

2 of the 3 ladders looking like a very respectable 10 shot group even though each shot in .5gr higher than the last and covering 200 fps gain.

We are wearing out an entire barrel for each one of the most popular cartridges we chamber to give our customers the best load notes we can on where a rifle typically shoots well, where it hits pressure with each combination, what bullets shoot the best etc.

This data will all be compiled for cartridge comparison when trying to choose between cartridges for your build and also put into a packet to be delivered to each customer in the future to help them with load development on their rifle. This data will be extremely relevant because it is data gathered on the exact Reamer that their barrel is chambered with. The data will also be available to any customer we have previously built a rifle for.

100 rounds of magnum 7 MEGA brass seated on the amp. The  bullet seating press has changed reloading by providing seatin...
06/10/2026

100 rounds of magnum 7 MEGA brass seated on the amp.

The bullet seating press has changed reloading by providing seating force feedback.

Changes in our load process that yield consistent results is what it’s all about.

One of the things that I love about Long Range Shooting is there are so many rabbit holes to go down and so much to learn! When you have consistent ways of getting repeatable measurements to see how something is improving based on different methods that is when things get fun.

Over the years many have believed in me and many have not. Regardless I’m not in competition with any other person. Life is a race against self. Constant improvement is what it’s all about.

7 Mega all finished up and starting to test fire. We’ve got a 5 shot group with 190 A-Tips and then 4 different powder l...
06/09/2026

7 Mega all finished up and starting to test fire.

We’ve got a 5 shot group with 190 A-Tips and then 4 different powder ladders with 190 A-tips. Each powder ladders is 10 shots with one shot every .5gr covering 4.5gr and around 200fps spread.

We’re going to start load dev with the N568 combo.

That’s a forgiving rifle right there! Elk are going to be in trouble this fall.

When you want a Builder that cuts no corners and tests every system, you know who to call.

06/08/2026

A3a stock perfection.

Five stocks. Same process. Same standards.

Every stock that leaves our shop is inlet in-house before bedding begins. We control inlet alignment, bedding geometry, and pillar height rather than accepting whatever comes out of the mold.

The goal isn’t to build one great rifle.

The goal is to build the hundredth rifle to the same standard as the first.

Consistency is not an accident. It’s a process.

Barrel chambered in 30 BR we did for a customer competing in Hunter benchrest. See last photo for his description on cla...
06/06/2026

Barrel chambered in 30 BR we did for a customer competing in Hunter benchrest.

See last photo for his description on class rules. The biggest being that optics are 6x only. Great shooting Jim!

06/04/2026

90 rounds of seating depth tests from .010-.030 with the 7 Max.

- 162 eldm
- 166 a-tip
-168 vld-h
-180 hyb
-180 eldm
-184 hybrid

Makes me wonder what it would have shot like with the screws right because this definitely isn’t bad. Regardless we’re on a strict schedule for barrel life and we will choose the best seating depth for each and press on with the powder ladders next.

New month, new set of builds starting this week! Round and round we go doing the same things all the time but each month...
06/03/2026

New month, new set of builds starting this week!

Round and round we go doing the same things all the time but each month they get better than the last.

I’m grateful God allowed me to wake up and give it another shot at learning to become more than I was yesterday. God is good!

Address

14782 F Road
Delta, CO
81416

Telephone

+19704175718

Website

Alerts

Be the first to know and let us send you an email when Stratton Custom Rifles posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Stratton Custom Rifles:

Share

Category