Proton Bikes

Proton Bikes Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Proton Bikes, Bicycle shop, Clever, MO.

06/12/2018

SpeedyBee F4 AIO Flight Controller available now!
https://www.speedybee.com/speedybee-f4-aio-flight-controller/

Bluetooth chip Integrated, MCU STM32F405, Built-in LC Filter(all 5V pads and 9V pad), Support OSD, PDB integrated for powering external devices.

Like our page, share and comment on this post, you will have the chance to get 1 free SpeedyBee F4 Flight controller or 1 Bluetooth module. Every 60 shares, we will give away one Flight Controller and 2 Bluetooth module for 3 different people.

Remember this bad boy? I had it listed in the spring at $1850, and then I pulled it and cut the seat mast because I thou...
09/29/2017

Remember this bad boy? I had it listed in the spring at $1850, and then I pulled it and cut the seat mast because I thought about keeping it, but I literally never rode it, so it's back on the table at a smoking deal: $1350! The seat mast is cut for a 30" inseam - I can go down an inch, or add about an inch of spacer (29-31" inseam) let me know if you have questions. You can't get this much bike anywhere else for $1350!

Electronic groupsets, like this Shimano Ultegra 6870 group, are one of the best technological advances to bicycles since...
04/27/2017

Electronic groupsets, like this Shimano Ultegra 6870 group, are one of the best technological advances to bicycles since non-wooden wheels. They're capable of ultra-precise shifts, sequential shifting, and shifting while cranking hard up a hill, and they NEV-VER need to be adjusted! Plus, they make a cool sound when shifting that will make your friends green with envy 😈. Batteries are easily recharged and last hundreds and even thousands of miles between charges. The system adds very little extra weight compared to their "mechanical" siblings. If you're ready to make the jump to electronic bliss, our carbon-frame, Di2-equipped bikes start at only $2099. Compare that price to any new Di2 bike from the big four, and you're saving at LEAST $1200-1600 over their cheapest entry into electronic shifting. That's enough savings to be able to upgrade the frame, add custom graphics, 50mm carbon wheels, and STILL be $800 to $1200 less!

04/26/2017

I'm working on putting items in the shop. I may have to make two shops - a bikes shop and a parts shop. Right now, it's just a bike package with frame and component upgrade listings. I'll keep at it.

Jr. rocking the new tee before the print is dry...
04/23/2017

Jr. rocking the new tee before the print is dry...

"Integrated" brakes on aero bikes like the ones on this Trek Madone 5.9 can be a nightmare to dial in. Our in-house tuni...
04/21/2017

"Integrated" brakes on aero bikes like the ones on this Trek Madone 5.9 can be a nightmare to dial in. Our in-house tuning expert has a pretty keen eye for this sort of stuff. Need your bike tuned up for the new season? Don't know if you need new brake pads, new cables, tires, bar tape, drivetrain parts? Got a slight wobble in your wheel causing some brake rub? In addition to building custom dream-bikes and custom refinishing, we do some pretty affordable wrenching too (some of us work for cookies). If you're in the Springfield area, and your bike needs some love, we just happen to love bikes.

Scott Speedster
04/21/2017

Scott Speedster

Nice Try factory. Now let's make them look pretty.
04/20/2017

Nice Try factory. Now let's make them look pretty.

A little while back we posted that we were going to give away a Plasti Dip makeover to show folks what it's all about. K...
04/12/2017

A little while back we posted that we were going to give away a Plasti Dip makeover to show folks what it's all about. Kohl Kellams offered up his bone-stock '08 Giant OCR C3. We did a little more work than just the Dip job - mostly cleaning up old parts. We did slam the mile-high stem and re-tape the bars. Here's before and after pics. We're all very pleased with the results. With proper care, this finish will last years, all while preserving the factory finish (and the resale value). If, for any reason, the owner gets tired of awesome, he can just peel off the Dip and voila - factory finish! We can do your bike too. Dip not only looks killer, it can make an old bike look fresh, and it can preserve the finish of a new bike. Dip jobs start at $100 for a single color with logos and branding.

Our custom coffee cups range from about $1300-$3000, but they come with a free bike!
03/30/2017

Our custom coffee cups range from about $1300-$3000, but they come with a free bike!

Address

Clever, MO
65631

Telephone

+14177735509

Website

Alerts

Be the first to know and let us send you an email when Proton Bikes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category