Tussey Mountain Precision

Tussey Mountain Precision The shop is a full service custom shotgun Gunsmithing shop, with over 36 years of experience.

The shop will be closed the next couple of days to deal with ongoing back issues. I hope to be open towards the end of t...
06/08/2026

The shop will be closed the next couple of days to deal with ongoing back issues. I hope to be open towards the end of the week for customers.

The shop will be closed today May 28 due to back issues.
05/28/2026

The shop will be closed today May 28 due to back issues.

The shop will be closed tomorrow Friday May 22 and Monday May 25 for the holiday weekend.
05/22/2026

The shop will be closed tomorrow Friday May 22 and Monday May 25 for the holiday weekend.

The shop had a Browning Browning B25 Superposed in that had the whole inertia system rebuilt. The shotgun was not switch...
05/21/2026

The shop had a Browning Browning B25 Superposed in that had the whole inertia system rebuilt. The shotgun was not switching from the bottom barrel to the top barrel when fired and I could not see anything that was preventing this. The only thing not replaced was the trigger, so I replaced this and it only worked intermittently. When I would bump the gun on the bench it would switch. I sat there for about 5 minutes thinking about it, then it came to me. The customer installed a 7 inch mercury recoil reducer in the stock. The new parts and tight tolerance of the parts along with the recoil device was in theory dampening the inertia. I removed the reducer then went and test fired it, sure enough my theory was correct. The shotgun functioned flawlessly after the devices removal. The customer is going to try a smaller device and see if that will work without damping the inertia to the point where it affects functionality.

American Arms Derby in .410. This shotgun came in with the complaint of not switching to the second barrel. Upon inspect...
05/20/2026

American Arms Derby in .410. This shotgun came in with the complaint of not switching to the second barrel. Upon inspection, it was found to need the trigger assembly reworked along with the locks. Once this was completed, I found that the right hand ejector was not properly functioning. The fix was to re-time the ejector. The shotgun was test, fired for function and reliability.

Beretta 688 in 12 gauge. This shotgun came into the shop for fitting and it was decided that the customer needed 7/8” r...
05/19/2026

Beretta 688 in 12 gauge. This shotgun came into the shop for fitting and it was decided that the customer needed 7/8” removed off the stock. This will give the customer a 13 7/8 length of pull. The stock was then fitted with a Kick Eez 401-8 pad, giving it the 13 7/8 length of pull.

Browning Citori XT in 12 gauge. This shotgun was brought in for cleaning and service. This shotgun, I would guess has ne...
05/13/2026

Browning Citori XT in 12 gauge. This shotgun was brought in for cleaning and service. This shotgun, I would guess has never had any service completed, due to how dirty it was and the condition of the firing pins and the internal springs. The shotgun was completely disassembled, cleaned, and lubricated. The test firing was completed for function and reliability.

Address

162 Wagner Road
Centre Hall, PA
16828

Opening Hours

Monday 12pm - 5pm
Tuesday 10am - 3pm
Thursday 10am - 3pm
Friday 10am - 3pm

Telephone

+18143602059

Website

Alerts

Be the first to know and let us send you an email when Tussey Mountain Precision posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tussey Mountain Precision:

Shortcuts

Share

Category