Albertson's Engine Service

10/09/2026

🔧 YOUR EQUIPMENT IS READY… PLEASE COME GET IT! 😅

We currently have quite a bit of completed equipment sitting here waiting to be picked up. Some of it has been ready for WEEKS!

We completely understand that life gets busy, but space is limited here at Albertsons Engine Service, and when completed equipment isn’t picked up, it makes it difficult for us to take in and work on other customers’ machines.

There’s also another reason you shouldn’t let your equipment sit! Even after we’ve serviced it and have it running properly, fuel left sitting in the carburetor can begin to deteriorate and cause problems all over again. We’d hate for you to pay for a repair only to end up with another issue because your machine sat too long.

A quick reminder of our pickup policy:

🔹 Please arrange pickup within 7 days of being notified that your equipment is ready.

🔹 A $50 per week storage fee may apply after 7 days if no arrangements have been made.

🔹 Equipment left for 30 days without communication may be subject to our unclaimed equipment policy.

Communication is key! ❤️ If you need extra time, just give us a call. We’re happy to work with you when we know what’s going on.

We appreciate every single customer who keeps our little shop busy. We just need your help keeping things moving!

Thank you!
Albertsons Engine Service 🔧

10/01/2026

I’ve had a couple customers tell me this week they’re waiting to tune their mowers up until the start of next season, and I’m here to tell you… 𝗧𝗛𝗔𝗧 𝗜𝗦 𝗡𝗢𝗧 𝗧𝗛𝗘 𝗥𝗜𝗚𝗛𝗧 𝗠𝗢𝗩𝗘! 😬

The best time to have your mower serviced is actually at the 𝗘𝗡𝗗 𝗼𝗳 𝘁𝗵𝗲 𝘀𝗲𝗮𝘀𝗼𝗻, before you put it away for winter.

Leaving old fuel sitting in your mower for months can cause problems in the fuel system. Something that may only need a simple 𝗰𝗮𝗿𝗯𝘂𝗿𝗲𝘁𝗼𝗿 𝗰𝗹𝗲𝗮𝗻𝗶𝗻𝗴 𝗻𝗼𝘄 could end up needing a 𝗰𝗮𝗿𝗯𝘂𝗿𝗲𝘁𝗼𝗿 𝗿𝗲𝗽𝗹𝗮𝗰𝗲𝗺𝗲𝗻𝘁 𝗯𝘆 𝘀𝗽𝗿𝗶𝗻𝗴 — which means a much bigger repair bill.

And there’s another reason not to wait until spring… 𝗲𝘃𝗲𝗿𝘆𝗼𝗻𝗲 𝗲𝗹𝘀𝗲 𝘄𝗮𝗶𝘁𝘀 𝘁𝗼𝗼. 😂 The beginning of mowing season is our busiest time of year and when wait times are the longest.

𝗧𝘂𝗻𝗲 𝗶𝘁 𝘂𝗽. 𝗪𝗶𝗻𝘁𝗲𝗿𝗶𝘇𝗲 𝗶𝘁. 𝗣𝘂𝘁 𝗶𝘁 𝗮𝘄𝗮𝘆 𝗿𝗲𝗮𝗱𝘆 𝗳𝗼𝗿 𝗻𝗲𝘅𝘁 𝘀𝗲𝗮𝘀𝗼𝗻. Then when spring comes, add fresh fuel and get back to mowing. 🌱

🔧 𝗕𝗢𝗕’𝗦 𝗦𝗛𝗢𝗣 𝗧𝗜𝗣: Service your seasonal equipment at the 𝗘𝗡𝗗 of the season, not the beginning!

09/25/2026

🚨 WAIT TIME UPDATE — PLEASE READ! 🚨

Well… we thought things were starting to slow down. We were wrong. 😂

We have had a HUGE amount of equipment dropped off over the last two weeks, and our current wait time has increased from approximately 1.5 - 2 WEEKS to approximately 2.5 - 3 WEEKS.

We are incredibly grateful to be this busy and to have so many people trust Albertsons Engine Service with their equipment. ❤️ But we also need everyone to understand what a 2-3week wait time actually means.

🔧 Your machine will not be looked at right away.

There is A LOT of equipment ahead of yours. We work through it as quickly and fairly as we can, in the order it comes in.

And every job takes time.

➡️ Diagnosing the problem takes time.
➡️ Writing estimates takes time.
➡️ Getting customer approvals takes time.
➡️ Ordering and waiting for parts takes time.
➡️ Installing parts and reassembling equipment takes time.
➡️ Testing equipment to make sure it’s actually fixed takes time.

Multiply that by the amount of equipment coming through our doors every week, and hopefully it puts our wait time into perspective.

📞 IF WE HAVE NOT CALLED YOU, THERE IS NO UPDATE YET.

We promise we are not sitting on an update!

As soon as we look at your equipment and have an estimate, WE CALL YOU. There is no need to call every few days to check if we’ve looked at it yet.

We don’t want your equipment sitting here any longer than you do. We want to repair it, get it back to you, and make room for the next machine!

We are one of the few small-engine repair shops left in the area, and the demand for this work is HIGH. There will almost always be a wait, especially during busy seasons.

Please keep the estimated wait time in mind when dropping off your equipment and give our guys the time they need to do the job RIGHT. 🔧

We are moving as fast as we can, and we appreciate your patience more than you know.

Thank you for keeping Albertsons Engine Service SO BUSY! ❤️🔧

09/07/2026

09/01/2026

🍂 GOODBYE SUMMER, HELLO FALL! 🍂

As we head into September, we want to say a huge THANK YOU to all of our customers for another busy spring & summer! ❤️🔧

We truly appreciate everyone who trusted us with their equipment, recommended us to friends & family, and continues to support our small business.

A few quick updates & reminders as we head into fall:

🔧 CURRENT WAIT TIME: 1½–2 WEEKS Turnaround may vary depending on the repair & parts availability.

⛽ FRESH FUEL. ALWAYS. Your machine is only as good as the fuel you put in it! If you aren’t sure how old the gas in your can is — don’t put it in your equipment.

❄️ WINTERIZE BEFORE YOU STORE IT. Know you won’t be using a machine for a month or longer? Prepare it for storage! Don’t leave old fuel sitting in it for months.

📞 PLEASE PICK UP COMPLETED EQUIPMENT PROMPTLY. Once you receive your completion call, please make arrangements for pickup as soon as possible. Our space is limited and we cannot store completed equipment for extended periods.

🍁 AND FINALLY — THINK AHEAD! Don’t wait until the first cold day or snowstorm to find out your winter equipment won’t start. Pull it out, add fresh fuel & test it BEFORE you need it!

Thank you again for another great summer! ❤️

Bring on fall! 🍂🔧

— Albertsons Engine Service

08/26/2026

🚨 PSA FROM YOUR SMALL ENGINE SHOP: STOP PUTTING THE BAD GAS BACK IN! 🚨

We see this ALL. THE. TIME.

Your mower, w**d whacker, chainsaw, generator, etc. comes into our shop because it won’t start or isn’t running properly.

We:
🔧 Clean the carburetor
🧼 Clean the fuel system/tank
⛽ Remove the old or contaminated fuel
✅ Add fresh fuel
✅ Get the machine running properly again

Then you take it home…

…and fill it from the same gas can that was sitting in your garage. 😩

A few days later, our phone rings:

“My machine is running bad again!”

Guys — THE GAS MATTERS.

Small engines are extremely sensitive to old, stale, water-contaminated and ethanol-blended fuel. Gas that seems perfectly fine for your car can cause problems in small-engine fuel systems, especially after it has been sitting.

And remember: the fuel in your gas can ages too. Dumping fresh gas on top of old gas does not magically make the old gas fresh.

Before you refill the machine we just repaired, ask yourself:

👉 How old is the gas in this can?
👉 Has it been sitting for over a month?
👉 Am I sure there isn’t water or contamination in it?
👉 Am I using the right fuel for this equipment?

If you don’t know — don’t put it back into your freshly serviced machine.

You already paid to have the fuel system cleaned. Don’t accidentally start the whole cycle over again.

Fresh machine. Fresh fuel. Every time.

— Albertsons Engine Service 🔧

07/01/2026

We’ll be closing at 12pm tomorrow and will be closed Friday and Saturday for the holiday weekend.

Thank you for supporting our small business. We hope you all have an amazing, safe 4th of July with your family and friends. We’ll see everyone back at the shop on Monday! 🇺🇸🛠️

05/11/2026

To our amazing customers — thank you for your patience during one of the busiest seasons we’ve ever experienced at Albertsons Engine Service.

First and foremost, this post is NOT meant to scare anyone away from bringing equipment to us. We truly appreciate every customer who supports our small business, and we are continuing to accept repairs and do everything we can to help our community.

We simply want to be honest and transparent about current turnaround times so customers know what to expect before dropping equipment off.

Right now we are receiving a high amount of pieces of equipment dropped off every single day, on top of the large amount already here waiting for service. With several small engine shops in our area closing over the last few years, we are doing our absolute best to help everyone who calls or walks through our doors.

At the moment, repair wait times are running approximately 3–4+ weeks before equipment can even be looked at. We completely understand how frustrating that is when the grass is growing fast and everyone needs their equipment running NOW.

Please know:
• We are not ignoring your machine
• We are not “holding” equipment on purpose
• We are working as fast as humanly possible every day

Currently, our shop is operating with a very small staff while still trying to keep up with overwhelming demand. Skilled small engine mechanics have become extremely hard to find, and trust us, we’ve been searching.

We truly appreciate every customer who continues to support us, recommend us, and remain patient while we work through this season. Your kindness means more than you know.

We promise we are here, we are working hard, and we are doing everything we can to keep South Jersey mowing, trimming, cutting, and running.

— Albertsons Engine Service

05/01/2026

If you have been wanting a Atv for your kids this is the opportunity I have 3 left and need them gone.