Frazertone

Frazertone Professional Guitar setup and repair.

Happy Thanksgiving from Frazertone!
11/27/2025

Happy Thanksgiving from Frazertone!

We get some pretty wicked winds in Alaska.
01/12/2025

We get some pretty wicked winds in Alaska.

: 8 a.m. Update: At approximately 2:30 a.m. DOT&PF Maintenance crews responded by using sawsalls (saws that can cut through metal) to dismantle the decking and caging that had fallen onto the Seward Highway. We then used front end loaders to move the debris off the highway and sweepers to ensure that smaller metal components were off the highway. We have personnel stationed at the area to monitor the situation.

The bridge superstructure remains intact and our bridge engineers are responding to conduct an inspection as quickly as possible.

7:45 a.m. storm update: At approximately 2:30 a.m. Jan. 12, the Rabbit Creek Pedestrian Bridge was severely damaged, and the debris fell into the Seward Highway. The debris has been moved and all lanes of the are now open. We will share more information as we can.

The black sheep of the guitar family.1. Modded Traveler guitar2. EVH SA-126 Wolfgang signature series.3. Dumpster Bass a...
09/07/2024

The black sheep of the guitar family.

1. Modded Traveler guitar
2. EVH SA-126 Wolfgang signature series.
3. Dumpster Bass acoustic (because I found it
on top of our dumpster).
4. Heavily modified Fender Geddy Lee Jazz
bass.
5. Schecter Dug Pinnick 12 string bass.

Someone is diggin' her "new" bass!
04/21/2024

Someone is diggin' her "new" bass!

Picked this up at a local auction a few days ago.  It's a '97 MIM Fender Precision Bass that is pretty filthy but in gre...
04/19/2024

Picked this up at a local auction a few days ago. It's a '97 MIM Fender Precision Bass that is pretty filthy but in great condition. Plugged it in and it sounded great, even with rusty strings. I'm fixing it up for my wife, hopefully she will like it when I'm finished.

I decided to spray 3 more coats of Crystal Granite Metallic lacquer on the Tele build, for a total of 7 coats.  Then I s...
03/20/2024

I decided to spray 3 more coats of Crystal Granite Metallic lacquer on the Tele build, for a total of 7 coats. Then I sprayed 5 coats of clear gloss nitrocellulose lacquer on it. Next I will apply 4 more coats of clear gloss, wet sand it with 800 grit sandpaper, 3 more coats of clear gloss, another round of wet sanding, 2 more coats of clear gloss, and then a cure time of 3-4 weeks. After the gloss cures, I'll hit it with another to of wet sanding using 1000-7000 grit increments of sandpaper.
Then the fun part of hand buffing with buffing compounds until I get a mirror finish.
I'm pretty happy with the results so far. The photos were taken before any wet sanding or buffing.

Four coats of Crystal Granite Metallic paint (same color as my truck), hard to capture with the camera.  Now for some fi...
03/13/2024

Four coats of Crystal Granite Metallic paint (same color as my truck), hard to capture with the camera. Now for some fine sanding, and then a dozen (for real) coats of Clear Gloss Nitrocellulose Lacquer with lots more wet sanding every three coats.

4 light coats of vinyl sealer/primer, then sanded with 1200 grit sandpaper.  Color coat is next.
03/13/2024

4 light coats of vinyl sealer/primer, then sanded with 1200 grit sandpaper. Color coat is next.

Finally got going on this Tele build.  Prepped it for the pour-fill (lots of sanding), applied the epoxy pour-fill and l...
03/10/2024

Finally got going on this Tele build. Prepped it for the pour-fill (lots of sanding), applied the epoxy pour-fill and let it cure for a week, then more sanding. It is now ready for a few coats of vinyl sealer.

5 years ago today.  7.1 Anchorage, Alaska.At Carrs while at work.
11/30/2023

5 years ago today. 7.1 Anchorage, Alaska.
At Carrs while at work.

Video and photos of the 7.1 Anchorage earthquake taken at the Carrs grocery store on Huffman Rd. 11/30/2018

Finally!  I have all the parts to start working on "Patty Ann".  The PU's are Brandonwound T-Tops, a replication of the ...
11/28/2023

Finally! I have all the parts to start working on "Patty Ann". The PU's are Brandonwound T-Tops, a replication of the early 70's Gibson T-Tops installed in the early 70's Gibson Les Paul Customs.

Address

Anchorage, AK
99508

Telephone

(907) 250-1845

Website

Alerts

Be the first to know and let us send you an email when Frazertone posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share