Signal Chain Audio

06/22/2026

I'm currently testing plugs from Amphenol. Super impressed with the design and build quality. Does anyone have an opinion on these?

06/16/2026

The G&H High Clarity Profile plugs are the best in the industry. They eliminate the tin plate usually found in guitar plugs and utilize a solid copper rod that shoots straight through the plug to the tip. This allows you to create a copper to copper connection.

06/16/2026

And here's the ST plug.

06/16/2026

Let's solder some G&H High Clarity Profile RA plugs!

The G&H High Clarity Profile plugs are the best in the industry. They eliminate the tin plate usually found in guitar plugs and utilize a solid copper rod that shoots straight through the plug to the tip. This allows you to create a copper to copper connection.

06/15/2026

If you ever wanted to know what the cable for a replica of Phil Lesh's 1974 Mission Control bass looks like, this is it. Six channels plus two for phantom power.

Fun project with !

06/10/2026

06/08/2026

Fun Fact: The opening sequence on our homepage was not created with A.I. I built a 90 degree camera jig using leftover wood scraps from my last 2x12 cabinet build and screwed a camera mount on top. I then opened up the side panel to my lightbox so I could get the camera in at the correct angle.

I recorded several passes (top angle moving downward) then took the best one, slowed it down by 50%, then ran it through Final Cut's stabilization feature a couple of times to smooth it out.

Voila. A.I can't do that s**t yet. Trust me, I tried - it kept changing either the plugs or the lettering on the heat shrink and the strap.

06/03/2026

FUN FACT: If you're cool, we might put your band's name on the heat shrink.

06/02/2026

For a limited time. Get yours today!