Thermacut Romania, SRL

Thermacut Romania, SRL Producător mondial de tehnologii de tăiere termică. Producător de sisteme de tăiere și consumabile pentru plasmă, laser și oxigaz.

05/12/2024

⚡ 👍 At full throttle for vehicle construction
Do you manufacture vehicles and components? Do you specialize in custom fabrication? Do you need powerful and reliable plasma cutting technology?

No problem at all! The new Thermacut® EX-TRAFIRE®125HD plasma cutters are the ideal solution for strong cuts and gouging in production, preparation of semi-finished products and repair work. They offer top performance and precise cuts.

Make the most of a 100% duty cycle for:
✔️ Cutting plate thickness up to 55 mm
✔️ gouging as part of repair work
✔️ preparing welded joints for large components
✔️ mechanized cutting of semi-finished products
✔️ marking components

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07skWj0

03/12/2024

🔥🔥 The simple solution for better gouging
Do you want to start welding immediately after gouging? Do you want to create gouges in thick components? Do you demand perfect results even on complex surfaces?

If so, you can now make the most of the new Thermacut® EX-TRAFIRE®105HD plasma cutter with an optimized gouging function. With its particularly long and strong plasma arc, it can master every task – both manual and mechanized.

The new EX-TRAFIRE®105HD plasma cutters
✔️ Developed especially for heavy-duty use
✔️ 100% duty cycle
✔️ Precise gouging in complex geometries
✔️ Rapid gouging of thick sheet metal
✔️ Clean joints for welding without preliminary work
✔️Cost-effective and ecological thermal removal of wear-resistant coatings with the Thermacut® FHT-EX® gouging torches

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07skhp0

28/11/2024

⭐ 👍 A new torch for more relaxed manual cutting
Are you looking for a plasma cutting torch that makes work easier? Do you require maximum performance and relaxation at the same time? Do you want to benefit from a torch with an award-winning design?

Discover the new powerful FHT-EX®105TT torch for EX-TRAFIRE®105HD plasma cutters now! These torches have been specially developed for relaxed heavy-duty applications with a 100% duty cycle. 💯

The new FHT-EX®105TT torch generation
✔️ Ideal for cutting, gouging and grid-cutting
✔️ Precise cuts
✔️ Thin sheet metal and thick components
✔️ Particularly ergonomic, ideal for long cuts
✔️ Less fatigue and less muscle tension

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07skfJ0

26/11/2024

⚡⚡Full power for energy management
Do you want to cut sheet metal up to 55 mm thick without any problems? Do you want to remove old welded seams? Do you need a powerful and IoT-capable plasma cutter?

Say hello to the new Thermacut® EX-TRAFIRE®125HD – the ideal solution for fast and clean cuts with a 100% duty cycle! These cutters are suitable for a wide variety of uses, from pipeline construction to wind power plants and right through to turbines and overhead power lines.

Make the most of a 100% duty cycle for:
✔️ cutting up to 55 mm material thickness
✔️ gouging
✔️ preparing welded joints
✔️ grid-cutting
✔️ IoT applications
✔️ marking

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07skd00

21/11/2024

💪 ⚡ Strong performance for perfect foundations
Do you process coils and profiles after fabrication? Do you cut sheet metal for further processing? Do you want to achieve a high cutting rate and good edge quality at the same time?

If so, the new Thermacut® EX-TRAFIRE®125HD plasma cutters are the ideal cutting systems for you! The powerful plasma cutters are ideal for strong, rapid cuts and a wide range of areas of application in steel mills and steel service centers. 🔧

Make the most of a 100% duty cycle for:
✔️ thick components
✔️ manual cutting
✔️ maintenance work
✔️ gouging

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07skhg0

19/11/2024

🔥 Robust solutions for the high seas
Do you build ships or foundation structures for offshore wind turbines and drilling rigs? Do you need precise cuts for high-quality components without delay? Are you looking for a solution for manual and mechanized welding?

If so, Thermacut® EX-TRAFIRE®85HD is the ideal solution for you! These new plasma cutting systems are not only extremely robust, productive and powerful but also provide highly clean and accurate cutting results.

Make the most of a 100% duty cycle for:
✔️ cutting up to 45 mm
✔️ gouging for welded joint processing and coating removal
✔️ preparing welded joints
✔️ mechanized cutting
✔️ IoT applications such as documentation, parameter transmission, fleet transmission and state inquiries
✔️ marking components

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07skhW0

14/11/2024

🔥🔥 The strong all-rounder for construction
Do you cut large bridge parts or building components manually? Do you need a flexible plasma cutter for all types of steel and aluminum? Do you want to avoid breaks and always make rapid progress when cutting?

If so, the new Thermacut® EX-TRAFIRE®85HD plasma cutters are the ideal solution for your construction sites! With their powerful performance and 100% duty cycle, the cutters will increase your productivity and are both robust and easy to handle.

Make the most of a 100% duty cycle for:
✔️ cutting up to 45 mm
✔️ gouging for welded joint processing and coating removal
✔️ preparing welded joints
✔️ mechanized cutting
✔️ grid-cutting
✔️ marking components

https://eu1.hubs.ly/H07skhN0

12/11/2024

👌 ⭐ Powerful and precise for general fabrication
Do you need plasma cutters that can do a lot and withstand even more for your industrial production? Do you value clean cuts without the need for subsequent work? Is high productivity important to you?

If so, it’s worth taking a look at the new Thermacut® EX-TRAFIRE®105HD. These plasma cutters are extremely robust and powerful and increase productivity in all production activities thanks to their fast and clean cutting results. 😊

Make the most of a 100% duty cycle for:
✔️ Ideal for plate thicknesses of up to 50+ mm
✔️ gouging for welded joint processing and coating removal
✔️ preparing welded joints
✔️ mechanized cutting when cutting to length or preparing semi-finished products
✔️ marking components

https://eu1.hubs.ly/H07sk9r0

07/11/2024

🔥 💪 Strong performance for heavy machinery
Do you fabricate excavators, tractors, or mining machinery? Do you produce components in series or manufacture complete machines? Do you require powerful plasma cutters with future-proof networking options?

If so, the new Thermacut® EX-TRAFIRE®105HD plasma cutters will tick all the boxes for you: plenty of power for sheet metal up to 55 mm thick, a wide variety of applications and interfaces for intelligent networking.

Make the most of a 100% duty cycle for:
✔️ Ideal for plate thicknesses of up to 50+ mm
✔️ gouging when removing wear-resistant coatings
✔️ preparing welded joints
✔️ mechanized cutting of semi-finished products and spare parts
✔️ IoT applications such as documentation, parameter transmission and production control
✔️ marking components

https://eu1.hubs.ly/H07sk9l0

05/11/2024

💪 ⚡ Because it’s all about performance.
Do you want a plasma cutter that really achieves what it promises? Do you need a 100% duty cycle? Does your plasma cutter need to be suitable for genuine heavy-duty tasks?

Meet the extremely powerful Thermacut® EX-TRAFIRE®105HD plasma cutters with a 100% duty cycle! Thanks to their high output power, these devices can continuously provide top cutting performance – for heavy-duty applications involving manual and mechanized cutting.

The new EX-TRAFIRE®105HD plasma cutters
✔️ Top performance thanks to a supremely high output power
✔️ 100% duty cycle
✔️ Ideal for continuous cutting
✔️ Significantly improves productivity

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07sjMQ0

31/10/2024

🔥 A one-stop solution. Do you want to switch flexibly between manual and machine cutting? Do you need functions such as gouging or grid-cutting? Do you need a plasma cutter that always provides maximum performance?

If so, the particularly versatile EX-TRAFIRE®105HD plasma cutter with a 100% duty cycle is the ideal solution for you! Made to master virtually every job and successfully tackle genuine heavy-duty tasks, this device sets new standards for plasma cutting. 😊

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07sjML0

29/10/2024

💯 💪 100% duty cycle – 100% EX-TRAFIRE®.
Do you want to significantly improve your productivity? Do you need a duty cycle that is 100% reliable? Are you looking for a genuine heavy-duty plasma cutter?

Discover the Thermacut® EX-TRAFIRE®105HD now – extremely powerful plasma cutters with a 100% duty cycle. Developed specifically for genuine heavy-duty use and always ready for action when you are.

Engineered for heavy-duty applications!

https://eu1.hubs.ly/H07sh8W0

Address

Bulevardul 1 Decembrie 1918 127A
Targu-Mures
540445

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Telephone

+40265263205

Website

Alerts

Be the first to know and let us send you an email when Thermacut Romania, SRL posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thermacut Romania, SRL:

Shortcuts

Share

Category