03/09/2020
INSTRUCTIONS FOR USING ELECTRICAL SENSITIVE MASSAGE MACHINE FROM SMART 3D
First, insert the battery into the device according to the correct electrode (negative, positive), note the battery must be usable, in case the battery is low, please replace the battery for a more effective massage.
Second: do the following: (Note: before using, use a towel to wipe sweat, or dry the water after bathing)
1. Turn on the power switch (black) at the location near the jack by turning it back and forth (hearing the buzzing sound is on) in case there is no signal, check the battery terminals and / or replace the battery with a new one.
2. Observe the number 1-2-3 behind and place the camera in the neck in the direction that the numbers can be read.
3. Two side bars include 4 control buttons:
- 2 buttons on the left: increase or decrease intensity
- 2 buttons on the right: includes a control button, a switch button.
4. Press the control button (hear the beep and the lights light)
5. Use the toggle button to select programs / treatments, use the left button to increase or decrease intensity.
6. Increase or decrease intensity: Initially, the use may cause discomfort (feeling like pinching, tickling or shivering), recommended for first time users to set the lowest mode, after You can use the button to increase or decrease the intensity on the left to adjust according to your needs.
7. Recommended usage time: from 15 minutes per day, power off after using.
