Hi-Power Performance

Hi-Power Performance Performance based workshop specialising in GTR's on Aucklands north shore

Finished up this genuine Nismo R32 GTR with 32,000km on the clock end of last yearCustomer asked us to make the engine b...
15/01/2026

Finished up this genuine Nismo R32 GTR with 32,000km on the clock end of last year

Customer asked us to make the engine bay look as original as possible as it was looking a little weathered

Motor came out and was refreshed top to bottom, engine bay stripped and repainted, every genuine hose available was bought and replaced, intake manifold was completely rebuilt by I.E.E and we also fitted a Motec M130 with all available sensors to bring it up to date

Came out really nice and looks just as good as when it would have rolled out of the factory (bar the overflow bottle which is on order)

This Evo wagon ended up being a bigger job than initially intended.. came in for some fab work but we found ✨glitter✨ in...
14/10/2025

This Evo wagon ended up being a bigger job than initially intended.. came in for some fab work but we found ✨glitter✨ in the oil. Upon further inspection we found a whole lot shady crap going on so started from scratch

2.2 stroker, CNC ported and built head, Garrett G35, PPG dogbox, Hypertune billet intake, billet rocker cover, billet intercooler, clamps and 347 hypex manifold
Heaps of custom fab including intercooler piping, exhaust, catch can and matching cover for drivers side
Turbosmart wastegate, fuel pressure reg and BOV as per usual. Speedflow everything fitting and hose wise

Pretty serious car now and will go just as good as it looks!

Had a tuff commy in with an LSA this weekFitted some thermal shielding underneath the blower and a 4 port water methanol...
03/09/2025

Had a tuff commy in with an LSA this week

Fitted some thermal shielding underneath the blower and a 4 port water methanol kit

Duane also fabbed up a new intake pipe as the old silicone 90 off the throttle body was a bit average

Back to NDT for some numbers!

If you own a GU with big tyres you’ll know the brakes are diabolical at best.. but I have the fix for thatI can supply a...
05/08/2025

If you own a GU with big tyres you’ll know the brakes are diabolical at best.. but I have the fix for that

I can supply and install a full bolt on upgrade to modified Toyota 200 series calipers with 330mm rotors (minimum of 17’s to clear) that will actually slow it down

Easy way to get through cert too!

Full manual conversion done on this R34 sedan using all brand new parts! Was really nice to do when you’re not given old...
23/07/2025

Full manual conversion done on this R34 sedan using all brand new parts!

Was really nice to do when you’re not given old worn out stuff to work with 😂

21/09/2024

1300WHP 'DECEVN' PPG SEQUENTIAL R32 GT-R | Premier Events, Chrome Horsepower Festival

Chrome NZ Premier Events Roll Race NZ Hi-Power Performance

Thanks to Azhar and the Premier Events team for hosting the 2024 Chrome Horsepower Festival! Two days of entertainment of a variety of builds, especially the one platform I favor, the RB powered one. Matt had done 'em good with his Hi-Power package and showed all drivers how maniacal he is driving 1300WHP single handedly. My question is, how do you build the guts to do that? More so, is this GT-R really 'DECEVN' anyone, 'cause it seems more intimidating than that...

Congratulations to Winners and Runner-ups of...
Chrome roll racing session:
Winner - Matt 'DECEVN' / Hi-Power Performance
Runner-up - Scott 'LMP666' / Harry's Euro

Media:

RH Photography:
Facebook - instagram.com/__rhphotography/
Instagram - instagram.com/__rhphotography/

Roll Race NZ:
Facebook - facebook.com/rollracenz
Web - premierevents.co.nz/events/rollrace

Premier Events:
Facebook - facebook.com/PremierEventsNZ
Instagram - instagram.com/premiereventsnz/
YouTube - youtube.com//
Web - premierevents.co.nz/

Hi-Power Performance:
Facebook - facebook.com/hipowernz/
Instagram - instagram.com/hipowerperformance/
YouTube - youtube.com/-powerperformance1584/
@ - [email protected]

Fueled by Fab-San on the job fitting up the Pandem kit to this 280Z project we have in the shop at the moment, some RWB ...
24/06/2024

Fueled by Fab-San on the job fitting up the Pandem kit to this 280Z project we have in the shop at the moment, some RWB inspired pictures to keep you entertained

Looking a bit like a Ford dealership 😂Couple brand new rangers in for some mods. White raptor got a light bar installed ...
23/05/2024

Looking a bit like a Ford dealership 😂

Couple brand new rangers in for some mods. White raptor got a light bar installed behind the grille wired up to the overhead switches, black ranger got a Dobinson 3” lift and 35” mud tyres on some KMC KM547’s

Here’s one of two R34 GTR builds we’ve been working on recently. Fab and custom coatings completed, ready for some wirin...
17/05/2024

Here’s one of two R34 GTR builds we’ve been working on recently. Fab and custom coatings completed, ready for some wiring and plumbing

N1 block forged 26
CNC ported and hand finished to our spec with full ferrea catalogue, Kelford cams and adjustable gears
Precision next gen 6670
Hypertune intake, clamps, 130mm intercooler etc
Turbosmart products all over
Frenchys fuel pump hanger
Haltech controlling the show
All fab inhouse by Duane

Bike not loud enough? Can’t find a system you like the look of or don’t want to spend stupid money on importing somethin...
24/04/2024

Bike not loud enough? Can’t find a system you like the look of or don’t want to spend stupid money on importing something? We may have the solution

Duane’s been busy making this system for my Road Glide and a couple of Ducatis recently. We’re open to any bike, any style of system you like. Hit us with a DM if you’re interested!

We’ve been a bit slack on the socials this year but we are alive and doing things 😂Just finished up Lucio’s immaculate R...
10/04/2024

We’ve been a bit slack on the socials this year but we are alive and doing things 😂

Just finished up Lucio’s immaculate R32 GTS-T build for him, it was dropped to us as a rolling shell we got given the go ahead to make it mint

RB25DET neo, plazmaman intake, Garret G30-770, 6Boost mani, new big box and all the fab work done by Duane including the custom RB26 front cover to suit the VCT cam gear

Wiring by OCD performance as always and tuned by NDT making 415kw which is plenty enough for now

Slicks GTR nearing completionRolled in the door (quite literally as the motor died on the way to the shop) completely st...
22/08/2023

Slicks GTR nearing completion

Rolled in the door (quite literally as the motor died on the way to the shop) completely standard and in a bit of a sad state

We got straight into it and after a few months this is where we are at!

Forged RB26
Precision 6870
6Boost exhaust mani
Hypertune V1 intake manifold
Hupertune 100mm intercooler
Hypertune clamps
PRP trigger and coil kit
Koyorad radiator
Speedtek dog engagement gear set
Haltech Elite 2500
Turbosmart BOV, OPR and wastegate
Franklin alternator kit
Speed flow plumbing throughout
Frenchys fuel hanger kit
All in-house fabrication
Whole lot or custom powdercoat and anodizing as always

Next it’s off to OCD performance for wiring then off to NDT for a tune

Address

14F Flexman Place
Auckland
0932

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Alerts

Be the first to know and let us send you an email when Hi-Power Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Featured

Share