BikeWrap

BikeWrap Official invisiFRAME and RideWrap fitter in Scotland

I can supply and install invisiFRAME or RideWrap protective kits for your bike

invisiFRAME kits are between £70 and £95 - see here for pricing https://www.invisiframe.co.uk/frames?___store=default

Hardtail kits are between £70-£75 dependent on model

Full Suspension are approximately £80 - £95 dependent on model

E-Bikes can be around £95 dependent on model

Suspension fork kits - £25 - £30

Frame Fitting is £100 - Your bike can be dropped off and will be ready for collect

ion within 24 hours or less

E-Bike frame fitting is £110 - Your bike can be dropped off and will be ready for collection within 24 hours or less

Fork Fitting is £35

(example; Bike dropped off at 5pm Monday, ready for collection at 9am Tuesday next day)

06/06/2026
John’s new Transition Regulator CX was over for RideWrap frame and Invisiframe fork protection via No.55 Bikes  Beaut of...
06/06/2026

John’s new Transition Regulator CX was over for RideWrap frame and Invisiframe fork protection via No.55 Bikes

Beaut of a rig in this black with gold flake paintjob, absolutely stunning.

Gave it a zero gap seamless headtube into downtube and also a seamless seatpost area so these sections look and feel like single piece rather than multi sections of film.

The new Zeb kit is brilliant too, extremely comprehensive in terms of amount of film coverage, first time applying one of these and it was impressive. Props to the team

Finally HALO ceramic coating was applied to entire bike, adding insane hydrophobic properties and ensuring it stays looking mint in any conditions Scotland throws at it…and a breeze to clean.

Absolutely stunning bit of kit. .55bikes currently have another in stock if anyone’s keen!

Huge thanks to the legend that is at .55bikes for recommending our services to John. ❤️

If you’d like your bike art protected, get in touch here or via Instagram

ross_at_bikewrap
thebikewrapper

Aoife’s new “Digital Blurple” Liv Intrigue X Advanced was over to have RideWrap frame and Invisiframe fork protection in...
31/05/2026

Aoife’s new “Digital Blurple” Liv Intrigue X Advanced was over to have RideWrap frame and Invisiframe fork protection installed.

Stunning colourway watching it shift from purple to teal to blue depending on the light angle 🤩

Tricky install especially as there was a ton more sections than usual to apply.

Finally the entire bike was treated to Gtechniq HALO ceramic coating to ensure this piece of art stays glossy in any conditions giving it insane hydrophobic properties.

Give Aoife’s award winning podcast a listen via Instagram at too!

Shout out to i-cycles as always for recommending me to Aoife ❤️

Frank’s gorgeous new Mondraker Dusty RR was here via Hart's Cyclery for a full RideWrap frame and fork protection kits i...
31/05/2026

Frank’s gorgeous new Mondraker Dusty RR was here via Hart's Cyclery for a full RideWrap frame and fork protection kits install.

Headtube into downtube and top tube to seat tube were given the zero gap seamless install so look and feel as one piece instead of multiple sections of film.

This bike was originally a mix of gloss parts with the majority of paint in matte. Frank opted to go full gloss to make the yellow paint really sing and the results are epic 💛

Finally the entire bike was treated to a Gtechniq HALO ceramic coating formulated especially for paint protection film, ensuring this bike will remain easy to clean and glossy in all conditions Scotland throws at her.

Lovely bike and Frank is an absolute gent!

Big shout out to the team at Hart’s Cyclery too for recommending me for the work.

If you’d like your bike art protected, get in touch here or below Instagrams:

ross_at_bikewrap
thebikewrapper

Alasdair’s Vitus Escarpe was back in to have a replacement top tube and rear upper seat installed after a couple bad cra...
31/05/2026

Alasdair’s Vitus Escarpe was back in to have a replacement top tube and rear upper seat installed after a couple bad crashes.

Film off, and reinstalled the Invisiframe on these sections, bikes looking back to gleaming again. Unfortunately there’s no medium size kit so a small size kit was used and stretched to fit etc.

Also re coated these sections with Gtechniq HALO ceramic coating to ensure they stay glossy in any conditions for years to come.

Siobhan’s new Giant TCR Pro 0 was in to have RideWrap protection installed. Full frame and fork are protected, with seam...
19/05/2026

Siobhan’s new Giant TCR Pro 0 was in to have RideWrap protection installed.

Full frame and fork are protected, with seamless headtube/top tube/downtube section install making it feel like a single piece of film flowing around that front triangle. Custom crank sections were also added to prevent heel rub.

Stunning colourway in the sage green, further protected with Gtechniq HALO ceramic coating specifically formulated for Paint Protection Film, adding more gloss and adding insane hydrophobic properties to the entire bike.

Stunner 🤩

If you’d like your bike art protected, get in touch here or via instagram at ross_at_bikewrap or thebikewrapper

Laurie’s new Trek Rail+ 8 was in to have full protection by Invisiframe on frame and forks. Lovely rig this one, featuri...
15/05/2026

Laurie’s new Trek Rail+ 8 was in to have full protection by Invisiframe on frame and forks.

Lovely rig this one, featuring a two tone black and grey paintjob.

Gloss film was used on the frame, which enhanced the matte grey sections of paint 🔥

Gtechniq HALO ceramic coating was used across the entire bike to give it insane hydrophobic qualities and enhance the gloss. This will ensure it looks great in all conditions and ease of cleaning for years to come.

Stunner 🤩

Get in touch if you’d like your bike art protected from the trails here or via Instagram @ thebikewrapper or @ ross_at_bikewrap

Scott’s new carbon Roval CLX iii wheelset was over to have RideWrap wheel protection applied. Full coverage with zero ga...
12/05/2026

Scott’s new carbon Roval CLX iii wheelset was over to have RideWrap wheel protection applied.

Full coverage with zero gap install and mm perfect fitment (each wheel differs front vs back).

Gtechniq HALO PPF specific ceramic coating was also applied to give these insane hydrophobic properties and further protect from the elements.

Stunning wheelset and ridiculously lightweight.

Brian’s new Cannondale SuperSix Neo special edition LAB71 was here to have RideWrap protection installed. Front triangle...
09/05/2026

Brian’s new Cannondale SuperSix Neo special edition LAB71 was here to have RideWrap protection installed.

Front triangle has a zero gap seamless install from headtube to downtube and some other areas so looks and feels like a single piece of film.

Carbon cranks were given custom made film coverage on front and rear facing sides of the crank arms. Gloss film used to accentuate the carbon weave on matte carbon.

Forged carbon Momo Racing handlebars were also custom protected; single one piece of film used to “bulk” wrap - this covers the topside and underside along with the carbon section of the stem. (This wasn’t easy and took a couple of attempts..). Gloss film used on the matte carbon to make the forged carbon “pop” in the light.

Added extra film in some hidden areas where kit wasn’t fully covering too in order to further protect the frame.

Finally, Gtechniq HALO ceramic coating (specifically formulated for protection film) was applied to the full bike. The carbon Vision wheels were coated with EXO ceramic coating which is ultra durable.

Both ceramic coatings will give the entire bike a few years of insane hydrophobic quality and ease of cleaning to ensure this stunner remains a beaut in any conditions Scotland throws at it.

🔥🔥🔥🔥

Sandy’s new Cube Agree was finally here to have its RideWrap protection installed. Cube had a product recall on the fork...
04/05/2026

Sandy’s new Cube Agree was finally here to have its RideWrap protection installed.

Cube had a product recall on the fork back in November’ish so after this was replaced and bike set up it was over here from East Kilbride.

Originally matte black, Sandy opted to go with a gloss conversion, the added bonus to this is that the unique carbon layup now shows in certain light giving this bike an unreal new identity.

Downtube features large “Cube” logos made up of tiny individual dimples so took a bit of doing to wrap with zero air or moisture affecting the look of the wrap. The film now fully conforms to each letter.

Headtube is seamless wrapped with zero gap too.

In addition custom crank pieces were created to prevent heel rub on the carbon cranks, and extra film doubled up along chain stay on crank side to protect from chain slap etc.

Finally full bike inc rims were treated to Gtechniq HALO ceramic coating to give extreme hydrophobic properties to ensure it’s a doddle to keep clean and look glossy in all conditions Scotland throws at us.

Stunner 🔥🔥🔥🔥

If you’d like your bike art protected, get in touch here or Instagram ross_at_bikewrap

Address

Newtongrange
EH224RY

Alerts

Be the first to know and let us send you an email when BikeWrap posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Category