Tamarack Cycles

06/03/2026

Mark’s new Tamarack frameset is out in the sun. This compact beauty is built for 57-reach sidepull brakes with clearance for 700x35’s, and features some lightly-modified Richard Sachs lugs, Columbus Spirit tubing, and stainless Paragon dropouts front and rear. The Porsche Cherry Red looks amazing in the sunshine! The colour-matched stem is by WrenSports. This handsome devil will soon be winging its way to the USA. Thanks for looking!


🇨🇦

🇨🇦

05/30/2026

Finished spraying some clearcoat on a couple of new Tamarack framesets today - here’s a few sneak peeks from the spray booth…

05/24/2026

One of my steel progeny made its way back home this week - built in 1997 (eeek, 29 years ago!), this one was commissioned by a former co-worker at my ex-shop - his nickname became “Cruiser Jim” for a while! This one is a mix of Reynolds 531 and 753, with a “lo-pro” curved top tube and a second top tube, with fastback seatcluster, a Kona Project Two fork, and a retro paint scheme. The last 15 years, Jim’s been more into Ducati’s and BMW 1000’s, and got tired of moving it around his garage, so he dropped it off to me. Looks like it’s going to get stripped, beadblasted, and resprayed to look like new again!

🇨🇦

🇨🇦

05/18/2026

So, the seatstay tops were sculpted, the stays brazed into place, the final braze-ons added, and Mark’s new Tamarack road frame is ready for paint. This one is built with Columbus Spirit tubing, some slightly-modified Richard Sachs lugs, a Long Shen flat-top crown, and stainless Paragon dropouts front and rear. Always satisfying to stamp the serial number on a completed frame build. Oh, wait, not completely ready for paint… I do have to buff the faces of the stainless dropouts and mask them off… oh well, tomorrow…

🇨🇦

🇨🇦

05/09/2026

Some progress on Mark’s new all-roads Tamarack frameset. This one’s built with Columbus Spirit tubing, for 57-reach sidepulls allowing tires of 700x35 or 700x38. Mark selected Richard Sachs’ “Nuovo Richie” lugs with a few modifications; I removed the forward tangs, and shortened the lug points to suit the 51cm geometry’s head tube length. The main triangle’s done now, on to the rear triangle next. Coming along nicely, I think.

🇨🇦

🇨🇦

04/13/2026

I just added the build photos of David's 853 Pro Team frame build to my photo gallery, if you're interested - lots and lots of process pics.

David's custom Reynolds 853 Pro Team Disc frame's build. David wanted an all-roads geometry capable of fitting tires from 700x32 to 700x8, without fender mounts in the fork and frame. He requested a stainless steel sleeve for the front derailleur mount area so that changing the size of the outer cha...

04/09/2026

Tamarack frame # 161 is ready for paint. This one is an all-roads/gravel disc brake, Reynolds 853 Pro Team frameset built to clear 650b x 48’s or 700c x 42 tires. Built with silver brazed lugged construction, it features internal routing for the rear disc brake through the down tube, and wide clearances for big tires. This one is up for purchase - planning to paint it metallic gold Imron in the next week or so, but if someone wants a custom paint job, contact me…. Designed with a 6-degree sloping top tube, it’s the equivalent of a 56cm level seat tube (actual seat tube is 51cm CTC) with a 54cm top tube - call it a “medium” in today’s language. Stack = 570, reach = 370, head angle 71.5, seat angle 73, full geometry deets available upon request. Interested? Contact me.

🇨🇦

🇨🇦

04/01/2026

Progress coming along on the next Tamarack custom frame - this one’s a lugged silver-brazed Reynolds 853 Pro Team all-roads machine. With the main triangle finished, I carved the seatstay tops from some sheet steel plate into an interesting 3d shape and brazed them in place. With the fender bridges are installed, the main frame is complete - now on to building the fork.


🇨🇦

🇨🇦

02/11/2026

Dave’s new Tamarack Reynolds 853-Pro-Team frameset is back from the spraybooth. I finished spraying this yesterday, and picked it up today. This colour is impressive - it is Mazda “soul red crystal metallic”, a multi-layer paint which is what gives it such great depth. Two coats of primer, two coats of a bright white on the down tube, followed by two coats of a coppery-red base, then two coats of a ruby-red-tinted clear, then decals, then two coats of clear. Phew! But a luscious deep red that looks amazing in the sun. There’s a bare 31.8mm stainless steel band brazed on the seat tube where the front derailleur clamps, so that a change of chainring size won’t affect the paint. Paragon Machine Work’s stainless UDH dropouts got their cutouts masked as well, showing off the stainless. After a few days to cure, and some white enamel applied in the cutouts in the lugs and fork blades, this beauty will be winging its way to western Canada.


🇨🇦

🇨🇦

02/05/2026

Paul’s Reynolds 853 29’er Tamarack is back from the paint shop. This is Mercedes Benz “brilliant silver metallic” - it’s too bad it’s a cloudy snowy day, as this colour really sparkles in the sunshine. Designed to clear 29x2.5” tires, it employed a 3d printed chainstay yoke and Paragon Machine Works UDH dropouts. The Bushnell bottom bracket allows it to be used as a singlespeed, but there are cable guides for a mechanical rear derailleur system as well. After an internal spray with RustCheck is allowed to drip dry for a couple of days, it will be winging its way to western Canada.


🇨🇦

🇨🇦