Let’s Fix It Jackson County

Let’s Fix It Jackson County Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Let’s Fix It Jackson County, Appliances, 307 W Bois Darc, Edna, TX.

05/04/2026

Just want to Thank all my followers and clients for this week. I was blessed to meet some that were willing to help me continue to help those that may not be able to buy new parts. I was able to help some that needed repairs and also was able to sell a couple of machines I refurbished this week.
So all in all this week was a GREAT WEEK.

04/30/2026

Here’s another option of cleaning that nasty front load door seal. Also some recommendations to help prevent it.

With the permission of my customer today to post these pictures of before and after results I wanted to explain why rout...
04/30/2026

With the permission of my customer today to post these pictures of before and after results I wanted to explain why routine dryer cleaning is important.
As you can see in the pictures of the dryer cabinet there is a lot of lint buildup. When the dryer gets like this it can’t exhaust the lint fast enough so it builds moisture due to heat (note the picture of the wet lint on the ground) yes I did clean that up before leaving the job. So after cleaning the inside of the dryer I moved dryer out to remove back panel. When I removed the dryer vent hose water started coming out. Instantly I knew the outside exhaust vent was plugged as seen in one of the pictures. The result was all the wet lint in the yard picture from me trying not to make a mess in the house. Once it was all cleaned up and the issue resolved I explained to the customers the importance of lint screen cleaning and checking the outside screen periodically. In my short time dealing with these repairs I have found this problem with exhaust lines plugged a couple of times.
So here is my hint to know if you need to check yours before you have to do a full cleaning. After running the dryer for maybe 5-10 minutes open the door and if you feel steam or if you wear glasses like I do they fog up that is a tell sign that you are not exhausting the heat fast enough.

04/29/2026

This weeks tip is if you are in a market for new refrigerator please watch a video on YouTube by Bens Appliances and Junk
Titled “The BEST Refrigerators of 2026! What to BUY & AVOID!
This guy does lots of research with statistical reports both consumer and technician surveys.
This video covers as parts availability and complexity of repairs. Video is a little over 30 minutes long but better to spend 30 minutes of educating yourself than the headache of having constant repair cost.

04/29/2026

I know I posted this morning about helping my niece in Indiana, but I did forget to mention last night I was asked if I had parts available for a dryer. Unfortunately I didn’t for that particular one, but was happy to help that person find part numbers to assist him. Once we determined what he needed I forwarded the parts list he needed to order.
Then this evening I was able to assist another follower get her machine going by having the part she needed to get her dryer going with the assistance of her son. Didn’t have the high limit switch they needed to replace which is recommended to replace when the thermal cut fuse but was able to order for them. But for now they are able to use their dryer.

04/28/2026

Let’s Fix it Jackson County was able to assist on a repair all the way In Evansville, Indiana this morning.
My niece posted she was looking for a dryer. So I asked what the issue was and she explained her symptoms. Gave her the 2 most common issues and how to test one without any special tools. She checked the door switch and her husband was able to replace and repair it!
I will say it again to all my followers, I am here to assist you. For those that want to do it yourself. I Have no issue losing a job because you are willing to try to repair yourself. Just warn you do it safely if it’s making any electrical component repairs. Disconnect the power take pictures of orientation of part and wiring.

04/27/2026

And just like that already a jobs scheduled for Monday and Tuesday! Thank you Lord

04/26/2026

It was a slow week but I am thankful for the opportunities I had this week.
I wanted to mention if anyone has the dreaded drain pump won’t stop running issue send me a message. If you are told the control board needs to be replaced at a cost of $185 & up for the board alone please send me a model number to your machine to see if I can repair your control board.

04/26/2026

As I have advertised before what I find I keep 😂. Unless it has sentimental value to you.

04/26/2026

12:57PM UPDATE | In a letter given to employees,
Electrolux Group announced to employees it will phase out refrigeration production at its Anderson, South Carolina facility by the end of July.

According to the company, the plant will be repurposed to manufacture premium top-load laundry appliances, with production expected to begin in the first half of 2027.

Employees will receive at least 60 days’ notice before their final employment date.

The company said it will provide support during the transition, including severance packages and benefits information, which will be sent to employees via email.

Electrolux directed employees with questions to contact HR or its support services team.

—

Employees tell me Electrolux in Anderson, South Carolina called a meeting this morning and announced the plant is closing end of July. This will impact hundreds of families.

One of my first jobs when I started this journey of washer and dryer repairs I came across this issue on a GE top load w...
04/25/2026

One of my first jobs when I started this journey of washer and dryer repairs I came across this issue on a GE top load washing machine. Since then this I believe the 6th one I have found like this. It wouldn’t be a big issue if you didn’t have to buy the whole basket to repair this. Cost can run up fast when handling a job like this. So to the scrap yard it goes after taking parts that can be used off of it. So if your GE washer starts shaking really bad and suspension rods seem fine. Just might be your problem. Also if it doesn’t spin the clothes out very well this could be the cause. Stay informed my friends on what you are buying. Reach out and ask technicians before buying a new washer or dryer. Ask these questions:
What brand do you work on the most?
What’s the average cost for repairs?
Which machine do you not really work on?
I may not be the most experienced technician out there, I can only report what I have seen since starting this field.

Address

307 W Bois Darc
Edna, TX
77957

Opening Hours

Monday 4:30pm - 8pm
Tuesday 4:30pm - 8pm
Wednesday 4:30pm - 8pm
Thursday 4:30pm - 8pm
Friday 4:30pm - 8pm
Saturday 9am - 5pm

Telephone

+3612350554

Website

Alerts

Be the first to know and let us send you an email when Let’s Fix It Jackson County posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Let’s Fix It Jackson County:

Shortcuts

Share

Category