30/11/2025
Error code list for washing machine
error code xn6688 universal pcb
E4- water level sensor issue
E3- lid switch issue
E0- water inlet issue
E1- drainage issue
C1- diagnostic mode
BEKO
E1 - Berkaitan water inlet
E2 - Berkaitan drain motor
E3 - Unbalance
E4- Over flow
E5- Water level
E6- Berkaitan pintu
Fd - Cuba reset ( ada dalam list di bawah)
DAEMA
E2 suis pintu. tukar baru. bypass
DAEWOO
E8 - Load sensor
E9 - Water level sensor
1E - water inlet
LE - Lid/ door error
OE - Drain water error
UE - Wash load error
DAEWOO/SHARP
E8- LOAD SENSING ERROR
E9- WATER SENSOR ERROR
IE- INLET ERROR
LE- LID ERROR
OE- DRAIN ERROR
UE- UNBALANCA ERROR
ELECTROLUX
E5 - masalah air tak keluar(sumbat). syiling dll.
E10 : Inlet error
E20: Drain error
E30: Pressure error
E40: Door error
E50: Eprrom error
E60: Heat error
HISENSE
E1- Suis pintu ( abg syawal
*HITACHI
C0- OVERLOUD ERROR
C1- INLET VALVE ERROR
C2-DRAIN ERROR
C3/C4- DOOR ERROR
C8- DOOR LOCK ERROR
C9-DOOR LOCK NOT RELEASED ERROR
F1- WATER PRESSURE ERROR
F9-CLUTCH GEAR ERROR
- slide coller problem. tak bolah spin (abe5)
- motor jem / rosak
- gear rosak
- sensor kotor / rosak
Fb - Board basah
- kabel bocor
FD- MOTOR DRAIN ERROR
- kabel drain motor putus
FL- Kipas pada pcb board (Abe din, Jan)
HITACHI INVERTER
F8- Slide collar
tanda: kadang boleh spin, kadang tak boleh, ada bunyi abnormal
HITEC
F1-Water level
*LG
DE- DOOR ERROR
- magnet pintu hilang
PE- WATER PRESSURE ERROR
1E- INLET VALVE ERROR
UE- UNBALANCE ERROR
DL/CL- CHILD LOCK ERROR
OE- DRAIN ERROR
RE- RELAY PCB ERROR
E3- WASH ERROR ( OVERLOUD )
SE- SENSOR MOTOR INDUCTION ERROR
*LG INVERTER
DE- DOOR ERROR
DL- Door lock (abe5) guna solenoid Model:WF-HX130V
PE- WATER PRESSURE ERROR
1E- INLET VALVE ERROR
E3- WASH ERROR ( OVERLOUD )
UE- UNBALANCE ERROR
OE- DRAIN ERROR
DL- DOOR LOCK ERROR
FE- INLET VALVE ERROR
LE- SENSOR MOTOR ERROR
CLUTCH ERROR
E6- CLUTCH MOTOR ERROR
DL/CL- DOOR/CHILD LOCK ERROR
AE - MOTOR ERROR
tE- wiring problem. mungkin putus atau tercabut
*RE- RELAY PCB ERROR*
SE- SENSOR MOTOR INDUCTION ERROR
MIDEA
E2 - board problem
E3- door switch problem
- Magnet switch problem
*PANASONIC
U11- DRAIN ERROR
U12- DOOR/LOCK ERROR
U13- UNBALANCE ERROR
U14- INLET VALVE/WATER PRESSURE ERROR, hos water level berlipat
air tak ada
U99 child lock mode dan pintu dibiarkan terbuka 10saat atau lebih
U18- PUMP/DRAIN FILTER ERROR
H01-WATER PRESSURE ERROR
*PANASONIC INVERTER
U01- WATER PRESSURE ERROR
H04- POWER RELAY/CONTROL PCB ERROR
H05- CONTROL PCB ERROR
H07- MOTOR TACHO/PCB ERROR
H09- POWER/DISPLAY PCB COMUNICATION ERROR
H17- TEMPERATURE SENSOR ERROR
H18- MOTOR THERMISTOR SENSOR ERROR
H21- INLET VALVE ERROR
H23- POWER BOX ERROR
H25/H55- MOTOR INDUCTION ERROR
H27- DOOR LOCK ERROR
H29- COOLING FAN ERROR
H41- 3D SENSOR ERROR
H43- LEAK DETECTED ERROR
H46- LEAK DETECTOR SENSOR/MAIN PCB ERROR
H51- OVERLOADED MOTOR ERROR
H52- HIGH INPUT VOLTAGE ERROR
H53-LOW VOLTAGE INPUT ERROR
61- lid switch
-wiring lid switch ada karbon
tanda: x boleh basuh
PENSONIC
EA Tikus makan wayar
EC ( error control) PCB rosak
*SAMSUNG
DE- DOOR ERROR
- Suis pintu
- magnet suis
- wayar @ sambungan berkulat
DE1- DOOR LOCK ERROR
DE2- DOOR LOCK NOT REALEASE ERROR
E4- Filter water inlet sumbat
1E- WATER PRESSURE ERROR
3E- MOTOR INDUCTION ERROR
4E- INLET VALVE ERROR
5E- DRAIN ERROR
- Duit @ benda sangkut apda drain valve
8E- OVER CURRENT ERROR
UE- UNBALANCE ERROR
- absorber
CL- CHILD LOCK ERROR
OE/OF- OVERFLOW ERROR
LE/LE1-WATER LEAKEGE ERROR
SANYO
E1 : Water supply obstacles.
E2 : Water does not flow.
E2 : Water is not discharged due to rupture valve, exhaust valve or exhaust valve.
EA : Broken water level sensor or line from buoy to board.
EC : Broken water level sensor or line from buoy to board
E1 : Don't enter the country.
RA : Damn buoy.
U3 : Set the device unbalanced.
U4 : Door switch.
U4 : Incident from the switch to the board.
U5 : The lid of the phone opens when in child lock mode.
UA : Damn buoy.
UC : Door switch.
UE : No load, motor runs off wire.
*SHARP
LE/E2- DOOR ERROR
-water level sensor (esx model - made in china)
E1- INLET VALVE ERROR
E3- DRAIN ERROR
E4- UNBALANCE ERROR
E5- water level sensor
- Air keluar problem
E9- WATER PRESSURE ERROR
C2- POWER FAILURE
water level rosak
LE - Pintu terbuka, berkaitan sensor pintu
SHARP INVERTER
E9- Mungkin motor jem sebab ada habuk atau plastik coil pecah. Buka magnet dan buang (ESV1015)
SINGER
E8- wiring water level problem (singer body samsung)
SINGER INVERTER
E9 water level problem
*TOSHIBA
E1- DRAIN ERROR
E3/E2- DOOR LOCK ERROR
E5- INLET VALVE ERROR
E6- DRAIN ERROR
E7-1 kapasitor rosak@ perlu reset
E7-4 -RESET PCB (wash,spin,super spin,on/off)
- Cicak
- AWB1000G. Reset pcb
(wash spin super spin preset start on)
E9/E7- WATER PRESSURE ERROR
Ed- Kulat pada soket magnet pada clutch collar.
- Sensor magnet pada clutch collar
*TOSHIBA INVERTER
E21/E23- DOOR LOCK ERROR
- lock lid patah
Ec5- SENSOR CLUTCH GEAR ERROR
Ec6- CLUTCH ERROR
E64 PCB / draining system
E71 Try reset.
Jika tak ok, clutch rosak (syawal)
E95 water level (abe5)
EL- INLET VALVE/PCB ERROR
EA-PCB ERROR
PRESSURE ERROR CODE
E2: POLYTRON
E4: AKARI
E7: TOSHIBA
F1: SANKEN
RESET BEKO
FD- Buka plug top. Biarkan satu ke lima minit kemudian baru on.
*RESET TOSHIBA WASHER*
1- water flow + preset + rinse + 0N (inverter). (E61)
2- wash + spin + super spin dry + ON (konvensional)
3- function + super spin dry + start + ON (konvensional)
4- preset + process + water level + ON (konvensional)
5- preset + course + water level + ON (konvensional)
6- super spin dry + course + water level + ON
7. wash+ spin + super spin + preset + start + on
8. -wash+spin+course+on (aw900L)
9. wash +spin+super spin+on/off)
RESET SHARP
1. Wind dry...power...start...res..
2. Wash + Spin + super spin dry (ESX model)
