GOODesign Labs

GOODesign Labs Male

04/06/2026

Download - https://www.patreon.com/posts/rick-sanchez-160147160
https://fab365.net/items/2760
After a long time, I have finally completed Rick Sanchez, one of the most requested characters by my fans.

Turning a hand-drawn animated character into a fully articulated 3D printable model is never easy. This project remained unfinished for quite some time, but I could no longer ignore the many requests from the community, so I decided it was finally time to bring Rick to life.

The biggest challenge was his extremely thin arms and legs, which made it difficult to design durable articulated joints. After experimenting with several different mechanisms, I adopted a filament-based joint system. The results were surprisingly effective, and I expect to use this technique in future designs as well.

Assembly is not particularly difficult, but please pay close attention to the left and right parts during assembly. Be sure to remove all supports before folding the model. There are also a few support sections that need to be removed after folding, so please check the assembly instructions carefully.

This is only the beginning! I plan to release additional face expressions, hands, and accessories in the future, so stay tuned for more updates.

To all the Rick and Morty fans who have patiently waited for this project, thank you for your support. I hope you enjoy bringing Rick Sanchez to life on your own 3D printer!

1 : 9 scale

Largest part in printing, size = X 54mm, Y64mm, Z 67mm, After full assembly size= X 100mm, Y 50mm, Z 210mm

Total Build Time : 19h 20m / Plastic Weight : 65g

29/05/2026

Download - https://www.patreon.com/posts/razor-crest-159474734
My Star Wars-inspired creations have always been among my most popular designs, and to celebrate the upcoming release of *Star Wars: The Mandalorian and Grogu*, I’ve created a brand-new version of the Razor Crest!

In the film, this Razor Crest represents an earlier stage of the ship before it became worn and battle-scarred, so I designed this version in a completely clean and pristine condition. Since I had previously designed the Razor Crest, I used that as a foundation while adding many new improvements and details for this release.

What’s new?

• The yellow painted sections are now separated into individual parts for easier and cleaner color assembly.
• Many smaller details that were missed in the previous version have been newly added for improved screen accuracy.
• A dedicated mounting area has been prepared for a future display stand. This feature was inspired directly by requests from fans who wanted to display the Razor Crest with the landing gear attached.

Assembly is very simple! Please follow the video guide, and if there are any parts that feel difficult to understand, checking my previous Razor Crest assembly video will be helpful.

This model is an exclusive item for Patreon supporters. Thank you for supporting my work and helping me continue creating new designs for fellow Star Wars fans and 3D printing enthusiasts.

Please enjoy this model for personal hobby use only, and kindly refrain from printing and selling physical copies.

Your support on Patreon means everything and helps bring even more exciting projects to life. Thank you, and may the Force be with you!



22/05/2026

Download -
https://www.patreon.com/posts/spacex-starship-158767717
https://fab365.net/items/2731
In most scale models, reducing the size often means sacrificing fine details. However, by enlarging specific sections at a smaller scale, it becomes possible to capture those intricate features more clearly—and this design is a perfect example of that approach.

When I first created a pencil case based on an enlarged section of the SpaceX Starship, I realized that it allowed me to include details that were impossible to achieve in a traditional scale model. This SpaceX-themed pencil case is not just a functional item—it offers a unique way to experience and appreciate the detailed structure of a spacecraft up close.

With the SpaceX Booster V3 Pencil Case, you can neatly organize your desk while enjoying design elements that go beyond what typical scale models can offer.

For this version, I was able to access reference materials showing parts of the internal structure, allowing me to recreate those details as accurately as possible.

This item also makes a great gift for space enthusiasts.

Thank you for your continued support, and I hope all SpaceX fans will enjoy this special piece! 🚀

Largest part in printing, size = X 84mm, Y 88mm, Z 94mm, After full assembly size= X 164mm, Y 128mm, Z 115mm

Total Build Time : 30h / Plastic Weight : 110g

15/05/2026

Download -
https://www.patreon.com/posts/ah-64a-apache-158226409
https://fab365.net/items/2667
I’ve created a weapon set for the AH-64 Apache that I previously designed.

After all, a military aircraft doesn’t truly feel complete without its armament. Once equipped, the Apache finally reveals its full presence and power.

Included Armament:

AGM-114 Hellfire
Hydra 70 Rocket
Assembly is simple—just follow the video guide and use adhesive to attach each part in the correct position.

Print and equip this weapon set to elevate your first helicopter model and showcase it with even greater impact!

1 : 48 scale
Largest part in printing, size = X 8.8mm, Y8.8mm, Z 35mm, After full assembly size= X 367mm, Y 306mm, Z 111mm

Total Build Time : 4h 30m / Plastic Weight : 11g

12/05/2026

Booster V3 Short 🚀
Fully 3D printed.

I designed this as a compact version of the Booster V3 — and it actually turned out better than expected.

This is a short clip of the model in action.
The full design is already available.

What do you think of this version? 👀

07/05/2026

Download - https://www.patreon.com/posts/ah-64-apache-157516915
https://fab365.net/items/2666
Get commercial license and download newest models cheaply- https://www.patreon.com/c/goodesign/

I’m excited to finally announce that I’ve designed my very first helicopter for 3D printing — the AH-64 Apache!

This has been a massive project that I’ve been planning and refining for a long time. Because it’s my first helicopter design, I’ve incorporated many new structural ideas and approaches.

Important Notes:

After removing supports, please make sure to clean and refine the surfaces carefully. Otherwise, you may have difficulty attaching the display stand cover later.
For foldable parts, ensure the edges are aligned precisely when folding and gluing. If folding is difficult, lightly scoring the fold line with a knife can help.
Some parts require trimming guides after folding. Be sure to cut them cleanly and smooth the edges properly.
When assembling the rear wheel, push the A-shaped folded section all the way into position.
For the front landing gear support (shock strut), make sure to check the correct top and bottom orientation before assembly.
The AN/ALQ-144 IR Jammer requires a different color on the top section. You can either paint it or change the filament during printing for better results.

For more detailed instructions, please refer to the video guide.

Stay tuned for more helicopters in this upcoming series!

1 : 48 scale

Largest part in printing, size = X 148mm, Y145mm, Z 146mm, After full assembly size= X 367mm, Y 306mm, Z 111mm

Total Build Time : 43h 17m / Plastic Weight : 141g

Design by GOODesign







29/04/2026

Download exclusive on Patreon - https://www.patreon.com/posts/iron-giant-claw-156860736

The popularity of my Iron Giant design was beyond anything I expected.
In response to your incredible support, I created additional parts such as the Angry mode face, the arm cannon, and the Superman logo—and I’m grateful that they were so well received.

Now, I’m excited to introduce another upgrade: the Energy Claw.

To express the glowing energy effect along its path, I used silky silver PLA with green tones. However, transparent green PLA or PETG would also be great choices for an even more striking result.

For assembly, I recommend securing the black ring with glue.
If the ring doesn’t fully close, you can slightly scale it up in the X and Y directions before printing.

For detailed assembly instructions, please refer to the video.

Please note that this item does not include the Iron Giant robot, arm cannon, or the angry face.
You can find those in the link below.

Download Iron Giant robot - https://www.patreon.com/posts/iron-giant-claw-156860736
Download rage mode head and Arm canon - https://www.patreon.com/posts/iron-giant-rage-148199515

Now, the only thing left is designing the body that transforms into full Attack mode.
I look forward to your continued support as I work toward completing the final form!

This item is available exclusively on GOODesign’s Patreon.

I finally released my New Glenn 3D printable model 🚀This was a challenging design — especially making it both detailed a...
27/04/2026

I finally released my New Glenn 3D printable model 🚀

This was a challenging design — especially making it both detailed and actually buildable.

I focused on:

* Clean part separation
* Easy assembly
* Stable structure after build

Seeing it come together is really satisfying.

If you're into rockets or 3D printing, I think you'll enjoy building this.

👉 https://goodesignlabs.gumroad.com/l/cyvopr

23/04/2026

Download -
https://www.patreon.com/posts/spacex-super-b19-156315608
https://fab365.net/items/2595

At the request of my fans and fellow makers, I’m excited to present the newly completed **SpaceX Booster B19, also known as V3.

The most notable change in this booster is the redesigned hot-stage adapter. Compared to previous versions, this structure is much thinner and more open, making it appear quite fragile. To accurately replicate this form while still supporting the weight of the Starship, I conducted extensive testing. In the end, I applied my signature folding structure design to achieve a balance of thinness and strength—resulting in a hot-stage adapter that is both delicate in appearance and structurally robust.

Secondly, the grid fins have been updated in both shape and number, now reduced to three. I have carefully recreated this change to match the real design as closely as possible.

Third, the engines have been upgraded to Raptor 3, bringing noticeable external differences. Compared to previous versions, the Raptor 3 has a simplified design, and the protective covering around the engines has been removed—leaving them fully exposed.

All of these updates have been faithfully captured with attention to detail, while also ensuring the model remains easy to assemble. The final appearance of this Booster V3 is truly stunning.

Of course, it is fully compatible with Starship S39 for docking.

Attention! When attaching the ring on the hot-stage adapter, make sure to align it according to the direction where the Starship will be connected!

Download Starship S39 -
https://www.patreon.com/posts/spacex-starship-153433681
https://fab365.net/items/2525

I look forward to the support and enthusiasm of aerospace and SpaceX fans!

And now… is it time to create Pad 2?

Your support can help bring the next project to life even sooner. 🚀

1:144 scale

Largest part in printing, size = X 62mm, Y 62mm, Z 202mm, After full assembly size= X 124mm, Y 97mm, Z 559mm

Total Build Time : 88h / Plastic Weight : 369g

Address

#302, 152, Nonhyeon-ro, Kangnam-gu
Seoul
06301

Website

Alerts

Be the first to know and let us send you an email when GOODesign Labs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category