FPV Drone Chile Store

FPV Drone Chile Store Asesoria y Atentida por piloto de Drones de carrera, Ventas de partes y repuestos, Precios Unicos, Exelente calidad, Marcas Reconocidas, Kits completos..

Respondo en todo horario.. tambien consultas y dudas por WhatSapp +569:.83012261.-

Realacc Qav-X 210/ 4MM Frame Kit$30.000.-Description:• Item name: X210 FPV Racing Frame• Wheelbase: 214mm• Material: car...
02/08/2017

Realacc Qav-X 210/ 4MM Frame Kit

$30.000.-

Description:

• Item name: X210 FPV Racing Frame
• Wheelbase: 214mm
• Material: carbon fiber
• Weight:
• 4mm frame arm version: 88g (frame + hardware), 93g (with battery protector plate)

Features:

• Full 3K Carbon Fiber frame.
• Optional 3mm or 4mm frame arms.
• Dual purpose FPV and HD camera mounting solution.
• Compact size for 5" propellers, 214mm motor to motor.
• Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
• "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
• Included power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics.
• LiPo battery protection plate included.
• Support to carry HD camera at 35 degree angle(such as the For gopro 4, Mobius, etc).
• Lightweight and rigi

Marca: DALPROP$2.500.-Nombre del artículo: 3 Palas HéliceNombre del artículo: T5045Diámetro del agujero.: 5mmlongitud de...
21/07/2017

Marca: DALPROP
$2.500.-
Nombre del artículo: 3 Palas Hélice
Nombre del artículo: T5045
Diámetro del agujero.: 5mm
longitud de hoja: 61.7mm
el paquete Incluye:
2 x CW Prop
2 x CCW Prop

DYS XSD30A BLHeli_S Multirotor ESC (Support DShot600/ DShot300)Valor $ 13.500Features• BLHeli_S ESC with Hardware genera...
21/07/2017

DYS XSD30A BLHeli_S Multirotor ESC (Support DShot600/ DShot300)

Valor $ 13.500

Features
• BLHeli_S ESC with Hardware generated PWM synchronous to MCU yields ultra-quiet motor performance.
• Utilizes high-performance EFM8BB21 50MHz MCU
• Weight: 7.5g
• Size(mm)L*W: 45*16.5*5.8
• BLHeli_S does Damped Light only
• Firmware upgradable via signal wire (works with USB Linker for XM series)
• Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)
• Supports DShot600, DShot300
• High-current burst rating
• High-Resolution Throttle steps

Specification
• Item Name: XSD30A Solder Version
• Input voltage: 3-6s Lipo
• BEC: NO
• Type: BLheli_S Firmware & DShot600/ DShot300
• Weight: 7.5g
• Size: 45*16.5*5.8mm
• Feature: Silabs EFM8BB21

DalProps 5040x3 V2 //Juego 2 CCW 2 CW$2.400Hélices DalProps Tripalas 5040x3 . Juego completo 4 unidades 2 CCW 2 CW
21/07/2017

DalProps 5040x3 V2 //Juego 2 CCW 2 CW

$2.400

Hélices DalProps Tripalas 5040x3 . Juego completo 4 unidades 2 CCW 2 CW

4PCS Landing Skid Gear Frame$ 1.000.-
07/07/2017

4PCS Landing Skid Gear Frame
$ 1.000.-

4 In 1 Hex Driver Screw Tools Set For RC Model$8.000.-Description:Material: SteelTip size: 1.5mm, 2.0mm, 2.5mm, 3.0mmIte...
07/07/2017

4 In 1 Hex Driver Screw Tools Set For RC Model

$8.000.-

Description:
Material: Steel
Tip size: 1.5mm, 2.0mm, 2.5mm, 3.0mm
Item size: 1.9 x10.4cm (Diameter x Length)
Item weight: about 57g
Usage: Suitable for different kinds of RC helicopters,quadcopters ,airplanes, cars, boats, etc.

Features:
High quality white hard steel with super hardness.
4 kinds of tip size for different needs: 1.5mm, 2.0mm, 2.5mm, 3.0mm.
Easy to change the tip for use.
Slip-resistant designed handle and optimal shaped drill for operation.

Package Included:
1 x 4 in1 Hex Screw Driver Set

Flysky Receptor X6B I-BUSValor $ 13.000-Description:Brand Name: FlyskyItem: X6B i-BUS 2.4GHz 6CH Receiver Channels: 6(PW...
03/07/2017

Flysky Receptor X6B I-BUS

Valor $ 13.000-
Description:
Brand Name: Flysky
Item: X6B i-BUS 2.4GHz 6CH Receiver
Channels: 6(PWM), 8(PPM), 18(i-BUS)
Model Type: Multi-Rotor
RF Range: 2.408-2.475 GHz
Brand Wigth: 500KHz
Number of bands: 135
RF Power: No more than 20 dBm
RX Sensitivity: -95dBm
2.4GHz protocol: AFHDS 2A
Modulation Type: GFSK
Stick resolution: 1024
Low voltage alarm: Yes
DSC port: PPM/PWM/i-BUS
Antenna Length: 93mm (Dual Antenna)
Power input: 4.0-8.4V
On-line Update: Yes(Wireless)
Range: >300m
Weight: 4.5g
Size: 36*22*7.5mm
i-BUS Port: Yes
Certificate: CE0678, FCC ID: N4ZX6B00
Compitable Transmitter: All AFHDS 2A Transmitter, for example FS-i10 FS-i6,FS-i6S, FS-i6X, FS-i4, FS-i4X.

Note: Failsafe only work on PWM, not in PPM or IBUS.

2.4G 2W 2000mW Mini Radio Signal Booster For DJI Phantom And all RC Control.$ 35.000Description:Item Name: 2.4G 2W Signa...
22/06/2017

2.4G 2W 2000mW Mini Radio Signal Booster For DJI Phantom And all RC Control.

$ 35.000

Description:
Item Name: 2.4G 2W Signal Booster
Material :CNC aluminum
Input Voltage: 5V-15V
Transmitter Gain: 11dB ±1.5dB
Noise Figure: ≤3.0dB
Input power range: 4dBm-20dBm
Max output power: 33dBm(2W)
Operation Voltage: 5V-15V
Operation Current: ≤400ma
Input connector: RP-SMA Female (Outer thread - inner hole)
Output connector: SMA Female (Outer thread- inner pin)
Size: 62*32*10mm (without antenna,mount and power cable)
Weight: 36G (without antenna)


Features:
Designed for FPV, with small size, light weight, and heat dissipation.
Decrease interference


Note:
Please assemble the antenna before powering on.
User may need to solder the signal booster to original transmitter module.
The product will require DIY modify skills and relative knowldge. Please confirm before purchasing.

Package Included:
1 x 2.4G 2W Signal Booster
1 x Antenna
1 x Power Cable
1 x Connecting Cable

Llave Herramienta Dys para Remover Helices$ 6.000DYS RTM10 Motor Bullet Cap Aluminum Quick-release Wrench Tool for 4MM 5...
22/06/2017

Llave Herramienta Dys para Remover Helices

$ 6.000

DYS RTM10 Motor Bullet Cap Aluminum Quick-release Wrench Tool for 4MM 5.5MM 8MM 10MM Screw Nuts
Specification:
Material: Alumium alloy
Color: Red
For 4mm/5.5mm/8mm/10mm bullet cap
Weight: 8g

Package Included:
1 XQuick-release Wrench Tool

Adaptadores 45° y 90° varios tipos$ 2.500 C/U
22/06/2017

Adaptadores 45° y 90° varios tipos
$ 2.500 C/U

Martian II 220 220mm 4mm Arm Thickness Carbon Fiber FrameValor $ 30.000.-Brand name: MartianⅡItem name: 220 220mm Frame ...
12/06/2017

Martian II 220 220mm 4mm Arm Thickness Carbon Fiber Frame
Valor $ 30.000.-

Brand name: MartianⅡ
Item name: 220 220mm Frame Kit
Wheelbase: 220mm
Material: Carbon fiber
Arm thickness: about 4mm
Thickness of top plate: about 1.5mm
Thickness of bottom plate: about 2mm
Weight: 155g

DYS XSD30A BLHeli_S Multirotor ESC (Support DShot600/ DShot300) Valor $ 13.500.- C/UFeatures• BLHeli_S ESC with Hardwar...
06/06/2017

DYS XSD30A BLHeli_S Multirotor ESC (Support DShot600/ DShot300)

Valor $ 13.500.- C/U

Features
• BLHeli_S ESC with Hardware generated PWM synchronous to MCU yields ultra-quiet motor performance.
• Utilizes high-performance EFM8BB21 50MHz MCU
• Weight: 7.5g
• Size(mm)L*W: 45*16.5*5.8
• BLHeli_S does Damped Light only
• Firmware upgradable via signal wire (works with USB Linker for XM series)
• Supports Motors with super high KV (EFM8BusyBee 50MHz can handle up to 500k eRPM)
• Supports DShot600, DShot300
• High-current burst rating
• High-Resolution Throttle steps

Specification
• Item Name: XSD30A Solder Version
• Input voltage: 3-5s Lipo
• BEC: NO
• Type: BLheli_S Firmware & DShot600/ DShot300
• Weight: 7.5g
• Size: 45*16.5*5.8mm
• Feature: Silabs EFM8BB21

Dirección

Las Cabras
2930000

Teléfono

+56983012261

Página web

Notificaciones

Sé el primero en enterarse y déjanos enviarle un correo electrónico cuando FPV Drone Chile Store publique noticias y promociones. Su dirección de correo electrónico no se utilizará para ningún otro fin, y puede darse de baja en cualquier momento.

Atajos

Compartir